Application and Research Status of Alternative Materials for 3D-printing Technology

Yanqing WANG; Jingxing SHEN; Haiquan WU

doi:10.11868/j.issn.1005-5053.2016.4.013

Volume 36 Issue 4

Aug. 2016

Turn off MathJax

Article Contents

Article Navigation > Journal of Aeronautical Materials > 2016 > 36(4): 89-98

Yanqing WANG, Jingxing SHEN, Haiquan WU. Application and Research Status of Alternative Materials for 3D-printing Technology[J]. Journal of Aeronautical Materials, 2016, 36(4): 89-98. doi: 10.11868/j.issn.1005-5053.2016.4.013

Citation:

Yanqing WANG, Jingxing SHEN, Haiquan WU. Application and Research Status of Alternative Materials for 3D-printing Technology[J]. Journal of Aeronautical Materials, 2016, 36(4): 89-98.

Citation:

Yanqing WANG, Jingxing SHEN, Haiquan WU. Application and Research Status of Alternative Materials for 3D-printing Technology[J]. Journal of Aeronautical Materials, 2016, 36(4): 89-98.

PDF( 705 KB)

Application and Research Status of Alternative Materials for 3D-printing Technology

doi: 10.11868/j.issn.1005-5053.2016.4.013

School of Materials Science and Engineering, China University of Mining and Technology, Xuzhou 221116, Jiangsu China

Received Date: 2015-12-22
Rev Recd Date: 2016-03-16
Publish Date: 2016-08-01

Abstract

Abstract

Application features and research status of alternative 3D-printing materials for six typical 3D-printingtechniques were reviewed. From the point of view of physical forms, four kinds of materials of liquid photosensitive resin material, thin sheet material (paper or plastic film) , low melting point filament material and powder material are included. And from the composition point of view, nearly all kinds of materials in the production and life are included such as polymer materials: plastic, resin, wax; metal and alloy materials; ceramic materials. Liquid photosensitive resin material is used for stereo lithigraphy apparatus(SLA); thin sheet materials such as paper or plastic film are used for laminated object manufacturing(LOM); low melting point polymer filament materials such as wax filament, polyolefin resin filament, polyamide filament and ABS filament are used for fused deposition modeling(FDM); very wide variety powder materials including nylon powder, nylon-coated glass powder, polycarbonate powder, polyamide powder, wax powder, metal powder(Re-sintering and infiltration of copper are needed after sintering), wax-coated ceramic powder, wax-coated metal powder and thermosetting resin-coated fine sand are used for selective laser sintering(SLS). Nearly the same above powder materials are used for selective laser melting(SLM), but the printed parts own much more higher density and better mechanical properties. Powder materials are likewise used for threedimensional printing and gluing(3DP), however, the powders are stuck together by tricolor binder sprayed through nozzle and cross-section shape of the part is color-printed on it. Finally, the development direction in both quality and the yield of 3D-printing materials were pointed out to be a bottle-neck issue and a hot topic in the field of 3D-printing.
- 3D-printing,
- material,
- application feature,
- development direction

FullText(HTML)

References(39)

References

[1]	DANIEL G,BASTIAN H,FRANZ G,et al.Continuous 3D-printing for additive manufacturing[J].Rapid Prototyping Journal,2014,20(4):320-327. doi: 10.1108/RPJ-08-2012-0068
[2]	王广春,赵国群.快速成型与快速模具制造技术及其应用[M].第三版.北京:机械工业出版社,2009.
[3]	黄树槐,肖跃加,莫健华,等.快速成形技术的展望[J].中国机械工程,2000(11):195-200. http://www.cnki.com.cn/Article/CJFDTOTAL-ZGJX2000Z1049.htm HUANG S H,XIAO Y J,MO J H, et al.Prospect of rapid prototyping technology[J].China Mechanical Engineering,2000(11):195-200. http://www.cnki.com.cn/Article/CJFDTOTAL-ZGJX2000Z1049.htm
[4]	孙晓林.3D打印技术的应用[J].机电产品开发与创新,2013(4):108-109. SUN X L.Application of 3D printing technology[J].Development & Innovation of Machinery & Electrical Products,2013(4):108-109.
[5]	MENG X L,SHU B Z.Research on the application of 3D printing technology in the field of packaging[J]. Applied Mechanics and Materials, 2015, 731: 304-308. doi: 10.4028/www.scientific.net/AMM.731
[6]	VAEZI M,SEIZ H,YANG S F.A review on 3D micro-additive manufacturing technologies[J].The International Journal of Advanced Manufacturing Technology,2013,67(5):1721-1754. http://cn.bing.com/academic/profile?id=2018566369&encoded=0&v=paper_preview&mkt=zh-cn
[7]	段玉岗,王素琴,陈浩,等.激光快速成型中影响光固化材料收缩变形的研究[J].化学工程,2000,28(6):53-56. http://www.cnki.com.cn/Article/CJFDTOTAL-IMIY200006013.htm DUAN Y G,WANG S Q,CHEN H,et al.Study on shrinkage and deformation of light curing materials in laser rapid prototyping[J]. Chemical Engineering, 2000,28(6):53-56. http://www.cnki.com.cn/Article/CJFDTOTAL-IMIY200006013.htm
[8]	PU X,ZHANG J,DUMUR F,et al.Visible light sensitive photoinitiating systems:recent progress in cationic and radical photopolymerization reactions under soft conditions[J].Progress in Polymer Science,2015,41:32-66. doi: 10.1016/j.progpolymsci.2014.09.001
[9]	KAREN LINDER.Tethon 3D releases new authentic porcelain ceramic resin for SLA/DLP 3D printers[N/OL].Prweb,2016-02-02[2016-6-14].http://www.prweb.com/releases/2016/02/prweb13194459.htm
[10]	杨家林,王洋,陈杨.快速成型技术研究现状与发展趋势[J].新技术新工艺,2003(1):28-29. http://www.cnki.com.cn/Article/CJFDTOTAL-XJXG200301011.htm YANG J L,WANG Y,CHEN Y. Research status and development trend of rapid prototyping technology[J] .New Technology & New Process, 2003(1):28-29. http://www.cnki.com.cn/Article/CJFDTOTAL-XJXG200301011.htm
[11]	荆慧.快速成型技术原理及成型精度分析[J].机械研究与应用.2013,26(2):183-187. http://www.cnki.com.cn/Article/CJFDTOTAL-JXYJ201302069.htm JING H. Principle of rapid prototyping technology and analysis of forming precision[J].Mechanical Research & Application,2013,26(2):183-187. http://www.cnki.com.cn/Article/CJFDTOTAL-JXYJ201302069.htm
[12]	李宝强,方沂.熔融沉积快速成型工艺精度分析与研究[J].福建轻纺,2013(11):41-44. http://www.cnki.com.cn/Article/CJFDTOTAL-FJQF201311022.htm LI B Q,FANG Y.Analysis and research on the precision of fused deposition rapid prototyping process[J]. Fujian Textile,2013(11):41-44. http://www.cnki.com.cn/Article/CJFDTOTAL-FJQF201311022.htm
[13]	吴涛,倪荣华,王广春.熔融沉积快速成型技术研究进展[J].科技视界,2013(34):94-95. http://www.cnki.com.cn/Article/CJFDTOTAL-KJSJ201334068.htm WU T,NING R H,WANG G C.Research progress of rapid prototyping technology[J].Science & Technology Vision,2013(34):94. http://www.cnki.com.cn/Article/CJFDTOTAL-KJSJ201334068.htm
[14]	JIANG C,ZHAO G F.A preliminary study of 3D printing on rock mechanics[J].Rock Mechanics and Rock Engineering,2015,48(3):1041-1050. doi: 10.1007/s00603-014-0612-y
[15]	TEKINALP P L,GREGORIO V K,CHADE V G, et al.Highly oriented carbon fiber-polymer composites via additive manufacturing[J].Composites Science and Technology,2014,105:144-150. doi: 10.1016/j.compscitech.2014.10.009
[16]	GAO K,TAO Y,ZHANG K, et al.Research on common problems based on a desktop 3D printer[J].Applied Mechanics and Materials,2015,757:175-178. doi: 10.4028/www.scientific.net/AMM.757
[17]	张永忠,席明哲,石力开,等.激光快速成形316L不锈钢研究[J].材料工程,2002(5):22-24. http://www.cnki.com.cn/Article/CJFDTOTAL-CLGC200205005.htm ZHANG Y Z,XI M Z,SHI L K,et al.Study on laser rapid forming 316L stainless steel[J].Journal of Materials Engineering,2002(5):22-24. http://www.cnki.com.cn/Article/CJFDTOTAL-CLGC200205005.htm
[18]	陈志平.基于3D打印的直线导轨快速制造的应用研究[J].机械工程师,2014(3):24-25. http://www.cnki.com.cn/Article/CJFDTOTAL-JXGU201403027.htm CHEN Z P.Application research of linear guide rail rapid manufacture based on 3D printing[J].Mechanical Engineer,2014(3):24-25. http://www.cnki.com.cn/Article/CJFDTOTAL-JXGU201403027.htm
[19]	孙建英.选择性激光烧结技术及其在模具制造领域的应用[J].煤矿机械,2006,27(7):112-113. http://www.cnki.com.cn/Article/CJFDTOTAL-MKJX200607052.htm SUN J Y.Selective laser sintering technology and its application in the field of die manufacturing[J].Coal Mining Machinery,2006,27(7):112-113. http://www.cnki.com.cn/Article/CJFDTOTAL-MKJX200607052.htm
[20]	王伟,王璞璇,郭艳玲.选择性激光烧结后处理工艺技术研究现状[J].森林工程,2014,30(2):101-104. http://www.cnki.com.cn/Article/CJFDTOTAL-SSGC201402026.htm WANG W,WANG P X,GUO Y L.Research status of selective laser sintering process[J].Forest Engineering,2014,30(2):101-104. http://www.cnki.com.cn/Article/CJFDTOTAL-SSGC201402026.htm
[21]	GROSS B C,ERKAL J L,LOCKWOOD S Y,et al.Evaluation of 3D printing and its potential impact on biotechnology and the chemical sciences[J]. Anal Chem,2014,86(7):3240-3253. doi: 10.1021/ac403397r
[22]	MURPHYS V,ATALA A.3D bioprinting of tissues and organs[J].Nature Biotechnology,2014,32(8):773-785. doi: 10.1038/nbt.2958
[23]	鲁中良,史玉升,刘锦辉,等.间接选择性激光烧结与选择性激光熔化对比研究[J].铸造技术,2007,28(11):37-42. http://www.cnki.com.cn/Article/CJFDTOTAL-ZZJS200711012.htm LU Z L,SHI Y S,LIU J H, et al.Comparative study of indirect selective laser sintering and selective laser melting[J].Casting Technology,2007,28(11):37-42. http://www.cnki.com.cn/Article/CJFDTOTAL-ZZJS200711012.htm
[24]	李瑞迪,魏青松,刘锦辉,等.选择性激光熔化成形关键基础问题的研究进展[J].航空制造技术,2012(5):18-23. LI R D,WEI Q S,LIU J H, et al.Research progress on key basic problems of selective laser melting[J]. Aeronautical Manufacturing Technology,2012(5):18-23.
[25]	SIMCHI A.Direct laser sintering of metal powders:mechanism,kinetics and microstructural features[J]. Materials Science and Engineering A, 2006,428(1/2):148-158. http://cn.bing.com/academic/profile?id=2000363357&encoded=0&v=paper_preview&mkt=zh-cn
[26]	HONG S,SANCHEZ C,DU H.Fabrication of 3D printed metal structures by use of high-viscosity Cu paste and a screw extruders[J].Journal of Electronic Materials,2015,44(3):836-841. doi: 10.1007/s11664-014-3601-8
[27]	EOS company.Materials for metal additive manufacturing[EB/OL].[2016-6-14]http://www.eos.info/material-m.
[28]	王华明,张述泉,王向明.大型钛合金结构件激光直接制造的进展与挑战[J].中国激光,2009,36(12):3204-3209. doi: 10.3788/JCL WANG H M,ZHANG S Q,WANG X M.Progress and challenges of laser direct manufacturing of large titanium alloy structural parts[J].China Laser,2009,36(12):3204-3209. doi: 10.3788/JCL
[29]	常辉,周廉,王向东.我国钛工业与技术进展及展望[J].航空材料学报,2014,34(4):37-43. doi: 10.11868/j.issn.1005-5053.2014.4.003 CHANG H,ZHOU L,WANG X D.Progress and prospect of titanium industry and technology in China[J].Journal of Aeronautical Materials,2014,34(4):37-43. doi: 10.11868/j.issn.1005-5053.2014.4.003
[30]	王华明,张述泉,汤海波,等.大型钛合金结构激光快速成形技术研究进展[J].航空精密制造技术,2008,44(6):28-30. http://www.cnki.com.cn/Article/CJFDTOTAL-HJZJ200806009.htm WANG H M,ZHANG S Q,TANG H B, et al.Research progress of laser rapid forming technology for large scale titanium alloy structure[J].Aviation Precision Manufacturing Technology,2008,44(6):28-30. http://www.cnki.com.cn/Article/CJFDTOTAL-HJZJ200806009.htm
[31]	张立武,写旭,杨延涛.钛合金精密热成形技术在航空航天的应用进展[J].航空制造技术,2015,489(19):14-17. http://www.cnki.com.cn/Article/CJFDTOTAL-HKGJ201519003.htm ZHANG L W,XIE X,YANG Y T.Progress in the application of titanium alloy precision hot forming technology in aerospace[J].Aeronautical Manufacturing Technology,2015,489(19):14-17. http://www.cnki.com.cn/Article/CJFDTOTAL-HKGJ201519003.htm
[32]	MA Y Z,YIN X W,FAN X M, et al.Near-net-shape fabrication of Ti₃SiC₂-based ceramics by three-dimensional printing[J].International Journal of Applied Ceramic Technology,2015,12(1):71-80. doi: 10.1111/ijac.12321
[33]	FENG P,MENG X M,CHEN J F, et al.Mechanical properties of structures 3D printed with cementitious powders[J].Construction and Building Materials,2015,93:486-497. doi: 10.1016/j.conbuildmat.2015.05.132
[34]	ZHOU J G.A new rapid tooling technique and its special binder study[J].Journal of Rapid Prototyping,1999(5):82-88. http://cn.bing.com/academic/profile?id=2143681275&encoded=0&v=paper_preview&mkt=zh-cn
[35]	PETER T,COLEMAN M,DONGHYUK K, et al.Research highlights: printing the future of microfabrications[J].Lab on a Chip,2014,14(9):1491-1495. doi: 10.1039/c4lc90023e
[36]	KIM Y,YOON C,HAM S, et al.Emissions of nanoparticles and gaseous material from 3D printer operation[J].Environ Sci Technol,2015, 49 (20):12044-12053. doi: 10.1021/acs.est.5b02805
[37]	FARAHANI R D,CHIZARI K,THERRIALT D.Three-dimensional printing of freeform helical microstructures:a review[J].Nanoscale, 2014,6(8):1475-485. http://cn.bing.com/academic/profile?id=2076921505&encoded=0&v=paper_preview&mkt=zh-cn
[38]	严实,赵金阳,陆夏美,等.基于声发射技术的三维编织复合材料低速冲击损伤分析[J].材料工程,2014(7):92-97. http://www.cnki.com.cn/Article/CJFDTOTAL-CLGC201407018.htm YAN S,ZHAO J Y,LU X M, et al.Low velocity impact damage analysis of 3D braided composites based on acoustic emission technique[J].Journal of Materials Engineering,2014(7):92-97. http://www.cnki.com.cn/Article/CJFDTOTAL-CLGC201407018.htm
[39]	杜双明,乔生儒.3D-C_f/SiC复合材料在1500℃的拉-拉疲劳行为[J].材料工程,2011(5): 34-37. http://www.cnki.com.cn/Article/CJFDTOTAL-CLGC201105007.htm DU S M,QIAO S R.Tensile and tensile fatigue behavior of 3D-C_f/SiC composites at 1500℃[J].Journal of Materials Engineering,2011(5): 34-37. http://www.cnki.com.cn/Article/CJFDTOTAL-CLGC201105007.htm

Relative Articles

Supplements(0)

Cited By

Proportional views

Proportional views

通讯作者: 陈斌, bchen63@163.com

1.
沈阳化工大学材料科学与工程学院沈阳 110142

Figures(1) / Tables(6)

Get Citation

PDF

XML

Article Metrics

Article views (7847) PDF downloads(189)

Application and Research Status of Alternative Materials for 3D-printing Technology

doi: 10.11868/j.issn.1005-5053.2016.4.013

Abstract

References

Proportional views

Catalog

通讯作者: 陈斌, bchen63@163.com

Article Metrics

Proportional views

Related

Application and Research Status of Alternative Materials for 3D-printing Technology

doi: 10.11868/j.issn.1005-5053.2016.4.013

Abstract

References

Proportional views

Catalog

通讯作者: 陈斌, bchen63@163.com

Article Metrics

Proportional views

Related

Export File

Citation

Format

Content