[1] |
MORDIKE B L. Magnesium properties-applications-potential[J]. Materials Science & Engineering: A, 2001, 302(1): 37-45
|
[2] |
SCHUMANN S, FRIEDRICH H E. Current and future use of magnesium in the automobile industry[J]. Materials Science Forum, 2003, 419/420/421/422: 51-56
|
[3] |
NIE J F, FANG X Y. Periodic segregation of solute atoms in fully coherent twin boundaries[J]. Science, 2013, 340(6135): 957-960 doi: 10.1126/science.1229369
|
[4] |
XU W, BIRBILIS N, SHA G, et al. A high-specific-strength and corrosion-resistant magnesium alloy[J]. Nature Materials, 2015, 14(12): 1229 doi: 10.1038/nmat4435
|
[5] |
吴国华, 陈玉狮,丁文江. 镁合金在航空航天领域研究应用现状与展望[J]. 载人航天, 2016, 22(3): 281-292 doi: 10.3969/j.issn.1674-5825.2016.03.002WU G H,CHEN Y S,DING W J,et al. Current research, application and future prospect of magnesium alloys in aerospace industry[J]. Manned Spaceflight, 2016, 22(3): 281-292.) doi: 10.3969/j.issn.1674-5825.2016.03.002
|
[6] |
陈亚光,蔡晓兰,王开军,等. 碳纳米管增强镁基复合材料的研究现状及发展[J]. 材料导报, 2012, 26(增刊 2): 110-112CHEN Y G,CAI X L,WANG K J,et al. Research progress in carbon nanotubes reinforced magnesium matrix composites[J]. Materials Review, 2012, 26(Suppl 2): 110-112.)
|
[7] |
OAKLEY R, COCHRANE R F, STEVENS R. Recent developments in magnesium matrix composites[J]. Key Engineering Materials, 1995, 104-107: 387-416 doi: 10.4028/www.scientific.net/KEM.104-107
|
[8] |
吴江涛, 王云龙. 金属基表面复合材料的制备方法及研究现状[J]. 世界有色金属, 2017(18): 233-233WU J T, WANG Y L. Preparation methods and research status of metal base surface composites[J]. World Nonferrous Metals, 2017(18): 233-233.)
|
[9] |
CHEN L, YAO Y. Processing, microstructures, and mechanical properties of magnesium matrix composites: A review[J]. Acta Metallurgica Sinica, 2014, 27(5): 762-774 doi: 10.1007/s40195-014-0161-0
|
[10] |
IIJIMA S. Helical microtubules of graphitic carbon[J]. Nature, 1991, 354(6348): 56-58 doi: 10.1038/354056a0
|
[11] |
SHEN K, ZHANG Q, HUANG Z H, et al. Interface enhancement of carbon nanotube/mesocarbon microbead isotropic composites[J]. Composites Part A:Applied Science & Manufacturing, 2014, 56(1): 44-50
|
[12] |
YU M F, FILES B S, AREPALLI S, et al. Tensile loading of ropes of single wall carbon nanotubes and their mechanical properties[J]. Physical Review Letters, 2000, 84(24): 5552 doi: 10.1103/PhysRevLett.84.5552
|
[13] |
HAN G, WANG Z, LIU K, et al. Synthesis of CNT-reinforced AZ31 magnesium alloy composites with uniformly distributed CNTs[J]. Materials Science & Engineering: A, 2015, 628: 350-357
|
[14] |
NAI M H, WEI J, GUPTA M. Interface tailoring to enhance mechanical properties of carbon nanotube reinforced magnesium composites[J]. Materials & Design, 2014, 60(8): 490-495
|
[15] |
YUAN Q H, ZENG X S, WANG Y, et al. Microstructure and mechanical properties of Mg-4.0Zn alloy reinforced by NiO-coated CNTs[J]. Journal of Materials Science & Technology, 2017, 33(5): 452-460
|
[16] |
LIANG J, LI H, QI L, et al. Fabrication and mechanical properties of CNTs/Mg composites prepared by combining friction stir processing and ultrasonic assisted extrusion[J]. Journal of Alloys & Compounds, 2017, 728
|
[17] |
LEE C, WEI X, KYSAR J W, et al. Measurement of the elastic properties and intrinsic strength of monolayer graphene[J]. Science, 2008, 321(5887): 385-388 doi: 10.1126/science.1157996
|
[18] |
BALANDIN A A, GHOSH S, BAO W, et al. Superior thermal conductivity of single-layer graphene[J]. Nano Letters, 2008, 8(3): 902-907 doi: 10.1021/nl0731872
|
[19] |
NOVOSELOV K S, GEIM A K, MOROZOV S V, et al. Electric field effect in atomically thin carbon films[J]. Science (New York, N.Y.), 2004, 306(5696): 666-669 doi: 10.1126/science.1102896
|
[20] |
ZHANG L, DUAN Z, ZHU H, et al. Advances in synthesizing copper/graphene composite material[J]. Advanced Manufacturing Processes, 2016, 32(5): 475-479
|
[21] |
XAVIOR M A, KUMAR H G P. Processing and characterization techniques of graphene reinforced metal matrix composites (GRMMC):a review[J]. Materials Today Proceedings, 2017, 4(2): 3334-3341 doi: 10.1016/j.matpr.2017.02.220
|
[22] |
RASHAD M, PAN F, LIU Y, et al. High temperature formability of graphene nanoplatelets-AZ31 composites fabricated by stir-casting method[J]. Journal of Magnesium & Alloys, 2016, 4(4): 270-277
|
[23] |
DU X, DU W B,WANG Z H, et al. Ultra-high strengthening efficiency of graphene nanoplatelets reinforced magnesium matrix composites[J]. Materials Science & Engineering: A, 2018, 711: 633-642
|
[24] |
XIANG S L, GUPTA M, WANG X J, et al. Enhanced overall strength and ductility of magnesium matrix composites by low content of graphene nanoplatelets[J]. Composites Part A: Applied Science & Manufacturing, 2017, 100: 183-193
|
[25] |
RASHAD M, PAN F, LIN D, et al. High temperature mechanical behavior of AZ61 magnesium alloy reinforced with graphene nanoplatelets[J]. Materials & Design, 2016, 89: 1242-1250
|
[26] |
RASHAD M, PAN F, ASIF M, et al. Powder metallurgy of Mg-1%Al-1%Sn alloy reinforced with low content of graphene nanoplatelets (GNPs)[J]. Journal of Industrial & Engineering Chemistry, 2014, 20(6): 4250-4255
|
[27] |
RASHAD M, PAN F, TANG A, et al. Improved strength and ductility of magnesium with addition of aluminum and graphene nanoplatelets (Al+GNPs) using semi powder metallurgy method[J]. Journal of Industrial & Engineering Chemistry, 2014, 23: 243-250
|
[28] |
LI G, XIONG B. Effects of graphene content on microstructures and tensile property of graphene-nanosheets/aluminum composites[J]. Journal of Alloys & Compounds, 2017, 697: 31-36
|
[29] |
YUAN Q H, QIU Z Q, ZHOU G H, et al. Interfacial design and strengthening mechanisms of AZ91 alloy reinforced with in-situ reduced graphene oxide[J]. Materials Characterization, 2018, 138: 215-228 doi: 10.1016/j.matchar.2018.02.011
|
[30] |
LUO A. Processing, microstructure, and mechanical behavior of cast magnesium metal matrix composites[J]. Metallurgical & Materials Transactions A, 1995, 26(9): 2445-2455
|
[31] |
GUNTHER R, HARTIG C, BORMANN R. Grain refinement of AZ31 by (SiC) P: Theoretical calculation and experiment[J]. Acta Materialia, 2006, 54(20): 5591-5597 doi: 10.1016/j.actamat.2006.07.035
|
[32] |
吴清仁, 文璧璇. SiC材料导热系数和热膨胀系数与温度关系[J]. 华南理工大学学报 (自然科学版), 1996, 24(3): 11-15WU Q R, WEN B X. Studies on temperature dependence of thermal conductivity and linear expansion for SiC material[J]. Journal of South China University of Technology (Natural Science), 1996, 24(3): 11-15.)
|
[33] |
WANG C H, et al. SiC nanoparticles reinforced magnesium matrix composites fabricated by ultrasonic method[J]. Transactions of Nonferrous Metals Society of China, 2010, 20(Suppl 3): 1029-1032
|
[34] |
NIE K B, WANG X J, WU K, et al. Development of SiCp/AZ91 magnesium matrix nanocomposites using ultrasonic vibration[J]. Materials Science & Engineering: A, 2012, 540(4): 123-129
|
[35] |
WANG X J, WANG N Z, WANG L Y, et al. Processing, microstructure and mechanical properties of micro-SiC particles reinforced magnesium matrix composites fabricated by stir casting assisted by ultrasonic treatment processing[J]. Materials & Design, 2014, 57(5): 638-645
|
[36] |
WANG X, LIU W, HU X, et al. Microstructural modification and strength enhancement by SiC nanoparticles in AZ31 magnesium alloy during hot rolling[J]. Materials Science & Engineering:A, 2018, 715: 49-61
|
[37] |
CHEN L Y, XU J Q, CHOI H, et al. Processing and properties of magnesium containing a dense uniform dispersion of nanoparticles[J]. Nature, 2015, 528(7583): 539 doi: 10.1038/nature16445
|
[38] |
李传鹏. 纳米TiC增强Mg-8Al-1Sn镁基复合材料的研究[J]. 吉林化工学院学报, 2017, 34(1): 19-22LI C P. Study on nano-TiC particulate reinforced Mg-8Al-1Sn magnesium matrix composites[J]. Journal of Jilin Institute of Chemical Technology, 2017, 34(1): 19-22.)
|
[39] |
NGUYEN Q B, GUPTA M, SRIVATSAN T S. On the role of nano-alumina particulate reinforcements in enhancing the oxidation resistance of magnesium alloy AZ31B[J]. Materials Science & Engineering: A, 2009, 500(1/2): 233-237
|
[40] |
NGUYEN Q B, GUPTA M. Increasing significantly the failure strain and work of fracture of solidification processed AZ31B using nano-Al2O3 particulates[J]. Journal of Alloys & Compounds, 2008, 459(1): 244-250
|
[41] |
GHASALI E, ALIZADEH M, NIAZMAND M, et al. Fabrication of magnesium-boron carbide metal matrix composite by powder metallurgy route: comparison between microwave and spark plasma sintering[J]. Journal of Alloys & Compounds, 2016, 697: 200-207
|
[42] |
LI H P, LI C, et al. Fabrication and properties of magnesium matrix composite reinforced by urchin-like carbon nanotube-alumina in situ composite structure[J]. Journal of Alloys & Compounds, 2018, 746(1): 320-327
|
[43] |
RASHAD M, PAN F, TANG A, et al. Synergetic effect of graphene nanoplatelets (GNPs) and multi-walled carbon nanotube (MW-CNTs) on mechanical properties of pure magnesium[J]. Journal of Alloys & Compounds, 2014, 603(9): 111-118
|
[44] |
SUN F, SHI C, RHEEK Y, et al. In situ synthesis of CNTs in Mg powder at low temperature for fabricating reinforced Mg composites[J]. Journal of Alloys & Compounds, 2013, 551: 496-501
|
[45] |
SHIMIZU Y, MIKI S, SOGA T, et al. Multi-walled carbon nanotube-reinforced magnesium alloy composites[J]. Scripta Materialia, 2008, 58(4): 267-270 doi: 10.1016/j.scriptamat.2007.10.014
|
[46] |
KANG P S, JEONG J C, PARK J G, et al. SiC formation on carbon nanotube surface for improving wettability with aluminum[J]. Composites Science & Technology, 2013, 74(74): 6-13
|
[47] |
袁秋红, 曾效舒, 刘勇,等. 碳纳米管增强镁基复合材料弹性模量的研究进展[J]. 中国有色金属学报, 2015(1): 86-97YUAN Q H, ZENG X S, LIU Y, et al. Research progress of elastic modulus of magnesium matrix composite reinforced by carbon nanotubes[J]. The Chinese Journal of Nonferrous Metals, 2015(1): 86-97.)
|
[48] |
KIM K T, CHA S I, GEMMING T, et al. The role of interfacial oxygen atoms in the enhanced mechanical properties of carbon-nanotube-reinforced metal matrix nanocomposites[J]. Small, 2008, 4(11): 1936-1940 doi: 10.1002/smll.v4:11
|
[49] |
YUAN Q H, ZENG X S, LIU Y, et al. Microstructure and mechanical properties of AZ91 alloy reinforced by carbon nanotubes coated with MgO[J]. Carbon, 2016, 96(1): 843-855
|
[50] |
YUAN Q H, ZHOU G H, LIAO L, et al. Interfacial structure in AZ91 alloy composites reinforced by graphene nanosheets[J]. Carbon, 2018, 127
|
[51] |
刘生发, 王慧源. Sr对AZ91镁合金铸态组织的影响及其细化机制[J]. 稀有金属材料与工程, 2006, 35(6): 970-973 doi: 10.3321/j.issn:1002-185X.2006.06.030LIU S F, WANG H Y. The influence of Sr addition on the microstructure of AZ91 magnesium alloy and its refinement mechanism[J]. Rare Metal Materials and Engineering, 2006, 35(6): 970-973.) doi: 10.3321/j.issn:1002-185X.2006.06.030
|
[52] |
闵学刚, 朱旻, 孙扬善,等. Ca对AZ91显微组织及力学性能的影响[J]. 材料科学与工艺, 2002, 10(1): 93-96 doi: 10.3969/j.issn.1005-0299.2002.01.024MIN X G, ZHU M, SUN Y S, et al. Effect of Ca on microstructure and tensile strength of AZ91 alloys[J]. Materials Science & Technology, 2002, 10(1): 93-96.) doi: 10.3969/j.issn.1005-0299.2002.01.024
|
[53] |
孙明, 吴国华, 戴吉春,等. Zr在镁合金中晶粒细化行为研究进展[J]. 铸造, 2010, 59(3): 255-259SUN M, WU G H, DAI J C, et al. Current research status of grain refinement effect of Zr on magnesium alloy[J]. Foundry, 2010, 59(3): 255-259.)
|
[54] |
ZENG X S, LIU Y, HUANG Q Y, et al. Effects of carbon nanotubes on the microstructure and mechanical properties of the wrought Mg-2.0Zn alloy[J]. Materials Science & Engineering: A, 2013, 57(1): 150-154
|
[55] |
RASHAD M, PAN F, ASIF M. Exploring mechanical behavior of Mg-6Zn alloy reinforced with graphene nanoplatelets[J]. Materials Science & Engineering: A, 2016, 649(4): 263-269
|
[56] |
袁付庆, 张静, 方超. 稀土元素对镁合金晶粒细化的研究[J]. 热加工工艺, 2012, 41(2): 30-33 doi: 10.3969/j.issn.1001-3814.2012.02.009YUAN F Q, ZHANG J, FANG C, et al. Effects of rare earth addition on grain refinement of magnesium alloy[J]. Material & Heat Treatment, 2012, 41(2): 30-33.) doi: 10.3969/j.issn.1001-3814.2012.02.009
|
[57] |
余琨, 黎文献, 张世军. Ce对镁及镁合金中晶粒的细化机理[J]. 稀有金属材料与工程, 2005, 34(7): 1013-1016 doi: 10.3321/j.issn:1002-185X.2005.07.002YU K, LI W X, ZHANG S J. Mechanism of grain refining by adding cerium in Mg and Mg alloys[J]. Rare Metal Materials and Engineering, 2005, 34(7): 1013-1016.) doi: 10.3321/j.issn:1002-185X.2005.07.002
|
[58] |
王社斌, 张金玲, 祁小叶,等. La对AZ91镁合金铸态组织的影响及其细化机制[J]. 材料工程, 2009(增刊 1): 303-307WANG S B, ZHANG J L, QI X Y, et al. The influence of La addition on the microstructure of AZ91 magnesium alloy and its refinement mechanism[J]. Material Engineering, 2009(Suppl 1): 303-307.)
|
[59] |
YUAN Q H, FU D M, ZENG X S, et al. Fabrication of carbon nanotube reinforced AZ91D composite with superior mechanical properties[J]. Transactions of Nonferrous Metals Society of China, 2017, 27(8): 1716-1724 doi: 10.1016/S1003-6326(17)60194-8
|
[60] |
YUAN Q H, QIU Z Q, ZHOU G H, et al. Interfacial design and strengthening mechanisms of AZ91 alloy reinforced with in-situ reduced graphene oxide[J]. Materials Characterization, 2018, 138: 215-228 doi: 10.1016/j.matchar.2018.02.011
|
[61] |
高生祥, 邓丽霞. 热等静压对3D打印新型镁合金组织与性能的影响[J]. 世界科技研究与发展, 2015(6): 643-645GAO S X, DENG L X. Effects of hot isostatic pressing on microstructure and properties of 3D printing new magnesium alloys[J]. World Sci-Tech R & D, 2015(6): 643-645.)
|
[62] |
郑增, 王联凤, 严彪. 3D打印金属材料研究进展[J]. 上海有色金属, 2016, 37(1): 57-60ZHENG Z, WANG L F, YAN B. Research progress of metal materials for 3D printing[J]. Shanghai Nonferrous Metals, 2016, 37(1): 57-60.)
|
[63] |
刘曼朗. 一种AZ91镁合金的注射成形方法[J]. 粉末冶金工业, 2009, 2: 27 doi: 10.3969/j.issn.1006-6543.2009.02.015LIU M L. A method for injection molding of magnesium alloy AZ91[J]. Powder Metallurgy Industry, 2009, 2: 27.) doi: 10.3969/j.issn.1006-6543.2009.02.015
|
[64] |
DU F, YU D, DAI L, et al. Preparation of tunable 3D pillared carbon nanotube–graphene networks for high-performance capacitance[J]. Chemistry of Materials, 2011, 23(21): 4810-4816 doi: 10.1021/cm2021214
|
[65] |
张仁杰. 镁基纳米混杂复合材料高温蠕变及界面力学行为多尺度研究 [D]. 大连: 大连理工大学, 2012.ZHANG R J. Multiscale research on high temperature creep and interfacial mechanical behavior of magnesium alloy based hybrid nanocomposites [D]. Dalian: Dalian University of Technology, 2012.
|