Journal of Aeronautical Materials
ISSN:1005-5053
Citation: | Fenghuai YANG, Guoxin LU, Qingtian YANG, Yongkang ZHANG. Research Progress of Laser Shock Treatment in the Field of Material Forming[J]. Journal of Aeronautical Materials, 2018, 38(6): 1-10. |
[1] | 袁哲俊, 王先逵. 精密和超精密加工技术[M]. 北京: 机械工业出版社, 2016.YUAN Z J, WANG X K. Precision and ultra precision machining technology[M]. Beijing: Mechanical Industry Press, 2016. |
[2] | 聂祥樊, 何卫锋, 臧顺来, 等. 激光冲击对TC11钛合金组织和力学性能的影响[J]. 航空动力学报, 2014, 29(2): 321-327NIE X F, HE W F, ZANG S L, et al. Effects on structure and mechanical properties of TC11 titanium alloy by laser shock peening[J]. Journal of Aerospace Power, 2014, 29(2): 321-327.) |
[3] | LIN B, ZABEEN S, TONG J, et al. Residual stresses due to foreign object damage in laser-shock peened aerofoils: simulation and measurement[J]. Mechanics of Materials, 2015, 82: 78-90 doi: 10.1016/j.mechmat.2014.12.001 |
[4] | LU G X, LIU J D, QIAO H C, et al. Crack appearance of a laser shock-treated single crystal nickel-base superalloy after isothermal fatigue failure[J]. Surface & Coatings Technology, 2017, 321: 74-80 |
[5] | WANG J T, ZHANG Y K, CHEN J F, et al. Effect of laser shock peening on the high-temperature fatigue performance of 7075 aluminum alloy[J]. Materials Science and Engineering: A, 2017, 704: 459-468 doi: 10.1016/j.msea.2017.08.050 |
[6] | CHASWAL V. A study of laser shock peening on fatigue behavior of IN718Plus superalloy: simulations and experiments[D]. Ohio, USA: University of Cincinnati, 2013. |
[7] | 邓仲华, 刘其斌, 徐鹏, 等. 方形光斑激光冲击强化金属表面的耐腐蚀性能及机理[J]. 材料工程, 2018, 46(8): 140-147DENG Z H, LIU Q B, XU P, et al. Corrosion resistance and mechanism of metallic surface processed by square-spot laser shock peening[J]. Journal of Materials Engineering, 2018, 46(8): 140-147.) |
[8] | SUN R J, LI L H, ZHU Y, et al. Microstructure, residual stress and tensile properties control of wire-arc additive manufactured 2319 aluminum alloy with laser shock peening[J]. Journal of Alloys & Compounds, 2018, 747: 255-265 |
[9] | HACKEL L, HARRIS F. Contour forming of metals by laser peening: US6410884B1[P/OL]. 2002-6-25. https://www.osti.gov/servlets/purl/874542. |
[10] | MURAKAWA H, DENG D, RASHED S, et al. Prediction of distortion produced on welded structures during assembly using inherent deformation and interface element[J]. Transactions of JWRI, 2009, 38(2): 63-69 |
[11] | 曹宇鹏, 冯爱新, 薛伟, 等. 激光冲击波诱导2024铝合金表面动态应变特性试验研究及理论分析[J]. 中国激光, 2014, 41(9): 90-95CAO Y P, FENG A X, XUE W, et al. Experimental research and theoretical study of laser shock wave induced dynamic strain on 2024 aluminum alloy surface[J]. Chinese Journal of Lasers, 2014, 41(9): 90-95.) |
[12] | HU Y X, XU X X, YAO Z Q, et al. Laser peen forming induced two way bending of thin sheet metals and its mechanisms[J]. Journal of Applied Physics, 2010, 108(7): 73117 doi: 10.1063/1.3486218 |
[13] | ZHOU W F, REN X D, WANG C C, et al. Residual stress induced convex bending in laser peen formed aluminum alloy[J]. Journal of Laser Applications, 2018, 30(1): 012001 doi: 10.2351/1.5012962 |
[14] | 孙承纬. 激光辐照效应[M]. 北京: 国防工业出版社, 2001.SUN C W. Effect of laser irradiation[M]. Beijing: National Defence Industry Press, 2001. |
[15] | 任旭东, 张永康, 周建忠, 等. 激光参数对Ti6Al4V钛合金激光冲击成形的影响[J]. 中国有色金属学报, 2006(11): 1850-1854 doi: 10.3321/j.issn:1004-0609.2006.11.004REN X D, ZHANG Y K, ZHOU J Z, et al. Influence of laser parameters on laser-shock forming of Ti-6Al-4V alloy[J]. The Chinese Journal of Nonferrous Metals, 2006(11): 1850-1854.) doi: 10.3321/j.issn:1004-0609.2006.11.004 |
[16] | 曹子文, 邹世坤, 车志刚. 激光诱导冲击波加载下铝合金弯曲变形规律与表面特性研究[J]. 激光与光电子学进展, 2015(12): 130-134CAO Z W, ZOU S K, CHE Z G. Bending deformation and surface characteristics of 2024 aluminum alloy processed by laser-induced shock wave[J]. Laser & Optoelectronics Progress, 2015(12): 130-134.) |
[17] | 卢国鑫. 激光冲击对高温合金表面形貌、组织与性能的影响[D]. 北京: 中国科学院大学, 2017.LU G X. Effect of Laser Shock on surface topography, microstructure and mechanical behaviors of superalloys[D]. Beijing: University of Chinese Academy of Sciences, 2017. |
[18] | 卢国鑫, 金涛, 周亦胄, 等. 激光冲击强化在高温合金材料应用上的研究进展[J]. 中国有色金属学报, 2018, 28(9): 1755-1764LU G X, JIN T, ZHOU Y Z, et al. Research progress of applications of laser shock processing on superalloys[J]. The Chinese Journal of Nonferrous Metals, 2018, 28(9): 1755-1764.) |
[19] | 黄志伟, 张兴权, 章艳, 等. 边界约束条件对薄板激光喷丸诱导残余应力和塑性变形的影响[J]. 红外与激光工程, 2017(8): 109-116HUANG Z W, ZHANG X Q, ZHANG Y, et al. Effect of boundary constraint conditions of thin plate on residual stresses and plastic deformation induced by laser shock peening[J]. Infrared and Laser Engineering, 2017(8): 109-116.) |
[20] | 胡雅骥, 陈彦初, 陈冬. 激光冲击强化技术在航空发动机叶片上的应用研究[J]. 燃气涡轮试验与研究, 2009(3): 54-56 doi: 10.3969/j.issn.1672-2620.2009.03.013HU Y J, CHEN Y C, CHEN D. Research on the application of laser shock processing technology on aero-engine blade[J]. Gas Turbine Experiment and Research, 2009(3): 54-56.) doi: 10.3969/j.issn.1672-2620.2009.03.013 |
[21] | 王文兵, 陈东林, 汪诚, 等. 薄板激光冲击强化残余应力场的数值模拟与试验[J]. 塑性工程学报, 2010, 17(2): 28-32 doi: 10.3969/j.issn.1007-2012.2010.02.006WANG W B, CHEN D L, WANG C, et al. Numerical simulation and experimental investigation of residual stress field for laser shock processing[J]. Journal of Plasticity Engineering, 2010, 17(2): 28-32.) doi: 10.3969/j.issn.1007-2012.2010.02.006 |
[22] | FANG Y W, LI Y H, HE W F, et al. Effects of laser shock processing with different parameters and ways on residual stresses fields of a TC4 alloy blade[J]. Materials Science and Engineering: A, 2013, 559: 683-692 doi: 10.1016/j.msea.2012.09.009 |
[23] | CORREA C, RUIZ DE LARA L, DÍAZ M, et al. Effect of advancing direction on fatigue life of 316L stainless steel specimens treated by double-sided laser shock peening[J]. International Journal of Fatigue, 2015, 79: 1-9 doi: 10.1016/j.ijfatigue.2015.04.018 |
[24] | DING K. FEM simulation of two sided laser shock peening of thin sections of Ti6Al4V alloy[J]. Surface Engineering, 2003, 19(2): 127-133 doi: 10.1179/026708403225002568 |
[25] | BHAMARE S, RAMAKRISHNAN G, MANNAVA SEETHA R, et al. Simulation-based optimization of laser shock peening process for improved bending fatigue life of Ti-6Al-2Sn-4Zr-2Mo alloy[J]. Surface & Coatings Technology, 2013, 232: 464-474 |
[26] | LUO K Y, LIU B, WU L J, et al. Tensile properties, residual stress distribution and grain arrangement as a function of sheet thickness of Mg-Al-Mn alloy subjected to two-sided and simultaneous LSP impacts[J]. Applied Surface Science, 2016, 369: 366-376 doi: 10.1016/j.apsusc.2016.02.045 |
[27] | 王冬宇, 胡永祥, 姚振强. 薄壁结构双侧异步激光喷丸强化试验研究[J]. 航空制造技术, 2017(8): 59-63WANG D Y, HU Y X, YAO Z Q. Experimental investigation of double-side laser peening of thin-wall parts with alternate side laser scanning[J]. Aeronautical Manufacturing Technology, 2017(8): 59-63.) |
[28] | HU Y X, YANG R Y, WANG D Y, et al. Geometry distortion and residual stress of alternate double-sided laser peening of thin section component[J]. Journal of Materials Processing Technology, 2018, 251: 197-204 doi: 10.1016/j.jmatprotec.2017.08.033 |
[29] | 李民, 纪看看, 刘涛, 等. 铝合金薄板在橡胶支撑下的激光冲击成形[J]. 激光与光电子学进展, 2017(10): 293-300LI M, JI K K, LIU T, et al. Laser shock forming of 2024-T351 aluminum alloy sheets supported by rubber[J]. Laser & Optoelectronics Progress, 2017(10): 293-300.) |
[30] | HU Y X, LI Z, YU X C, et al. Effect of elastic prestress on the laser peen forming of aluminum alloy 2024-T351: experiments and eigenstrain-based modeling[J]. Journal of Materials Processing Technology, 2015, 221: 214-224 doi: 10.1016/j.jmatprotec.2015.02.030 |
[31] | RAMATI S, LEVASSEUR G, KENNERKNECHT S. Single piece wing skin utilization via advanced peen forming technology[C]//Proceedings of the 7th International Conference on Shot Peening(ICSP-7), [S.L.]: [s.n.], 2000: 2072213. |
[32] | DING H, SHEN N G, LI K Q, et al. Experimental and numerical analysis of laser peen forming mechanisms of sheet metal[C]//ASME International Manufacturing Science and Engineering Conference, [S.L.]: [s.n.], 2014: V002T02A102. |
[33] | 罗开玉, 陈起, 吕刺, 等. 双面激光同时冲击AM50镁合金板料的厚度分析[J]. 中国激光, 2014(1): 59-63LUO K Y, CHEN Q, LV C, et al. Thickness analysis of two-sided simultaneous laser shock processing on AM50 Mg alloy[J]. Chinese Journal of Lasers, 2014(1): 59-63.) |
[34] | 王长雨, 罗开玉, 鲁金忠. 双面激光喷丸条件下冲击前进方向对AM50镁合金试样残余应力场的影响[J]. 中国激光, 2016(3): 43-49WANG C Y, LUO K Y, LU J Z. Effect of advancing direction on residual stress fields of am50 mg alloy specimens treated by double-sided laser shock peening[J]. Chinese Journal of Lasers, 2016(3): 43-49.) |
[35] | RUBIO-GONZÁLEZ C, FELIX-MARTINEZ C, GOMEZ-ROSAS G, et al. Effect of laser shock processing on fatigue crack growth of duplex stainless steel[J]. Materials Science and Engineering: A, 2011, 528(3): 914-919 doi: 10.1016/j.msea.2010.10.020 |
[36] | PEI Y T, DUAN C H. Study on stress-wave propagation and residual stress distribution of Ti-17 titanium alloy by laser shock peening[J]. Journal of Applied Physics, 2017, 122(19): 193102 doi: 10.1063/1.5001724 |
[37] | ZHANG Z Y, NIAN Q, DOUMANIDIS CHARALABOS C, et al. First-principles modeling of laser-matter interaction and plasma dynamics in nanosecond pulsed laser shock processing[J]. Journal of Applied Physics, 2018, 123(5): 54901 doi: 10.1063/1.5021894 |
[38] | CORATELLA S, STICCHI M, TOPARLI M B, et al. Application of the eigenstrain approach to predict the residual stress distribution in laser shock peened AA7050-T7451 samples[J]. Surface & Coatings Technology, 2015, 273: 39-49 |
[39] | HU Y X, YAO Z Q, HU J. 3-D FEM simulation of laser shock processing[J]. Surface & Coatings Technology, 2006, 201(3/4): 1426-1435 |
[40] | HFAIEDH N, PEYRE P, SONG H B, et al. Finite element analysis of laser shock peening of 2050-T8 aluminum alloy[J]. International Journal of Fatigue, 2015, 70: 480-489 doi: 10.1016/j.ijfatigue.2014.05.015 |
[41] | 李应红. 激光冲击强化理论与技术[M]. 北京: 科学出版社, 2013.LI Y H. Theory and technology of laser shock processing[M]. Beijing: Science Press, 2013. |
[42] | HU Y X, HAN Y F, YAO Z Q, et al. Three-dimensional numerical simulation and experimental study of sheet metal bending by laser peen forming[J]. Journal of Manufacturing Science and Engineering-Transactions of the ASME, 2010, 132: 61001 doi: 10.1115/1.4002585 |
[43] | SUN R J, LI L H, ZHU Y, et al. Dynamic response and residual stress fields of Ti6Al4V alloy under shock wave induced by laser shock peening[J]. Modelling & Simulation in Materials Science & Engineering, 2017, 25(6): 1-16 |
[44] | 胡正云, 李满福, 谢兰生. TB6钛合金激光喷丸与机械喷丸残余应力场有限元模拟[J]. 航空材料学报, 2013, 33(4): 37-42HU Z Y, LI M F, XIE L S. Finite element simulation of residual stress field in tb6 titanium alloy induced by laser shock peening and shot peening[J]. Journal of Aeronautical Materials, 2013, 33(4): 37-42.) |
[45] | YELLA P, VENKATESWARLU P, BUDDU RAMESH K, et al. Laser shock peening studies on SS316LN plate with various sacrificial layers[J]. Applied Surface Science, 2018, 435: 271-280 doi: 10.1016/j.apsusc.2017.11.088 |
[46] | TSUYAMA M, EHARA N, YAMASHITA K, et al. Effect of laser peening with glycerol as plasma confinement layer[J]. Applied Physics A, 2018, 124(3): 1-6 |
[47] | TAKATA T, ENOKI M, CHIVAVIBUL P, et al. Effect of confinement layer on laser ablation and cavitation bubble during laser shock peening[J]. Materials Transactions, 2016, 57(10): 1776-1783 doi: 10.2320/matertrans.M2016150 |
[48] | XU Y J, DU Z Y, RUAN L, et al. Research status and development of laser shock peening[J]. Journal of Laser Applications, 2016, 28(2): 22508 doi: 10.2351/1.4943999 |
[49] | 陈浩, 曲中兴, 张立武. 航空航天整体结构件新型校形技术研究现状[J]. 航天制造技术, 2017(1): 11-16 doi: 10.3969/j.issn.1674-5108.2017.01.004CHEN H, QU Z X, ZHANG L W. Research status of new correction technology of aerospace monolithic component[J]. Aerospace Manufacturing Technology, 2017(1): 11-16.) doi: 10.3969/j.issn.1674-5108.2017.01.004 |
[50] | 丁华, 蔡兰. 基于激光冲击波的金属板料精密校形技术[J]. 江苏大学学报(自然科学版), 2011(2): 195-198 doi: 10.3969/j.issn.1671-7775.2011.02.016DING H, CAI L. Sheet metal sizing method based on laser shock wave[J]. Journal of Jiangsu University (Natural Science Edition), 2011(2): 195-198.) doi: 10.3969/j.issn.1671-7775.2011.02.016 |
[51] | 何卫锋, 李应红, 聂祥樊, 等. 激光冲击叶片榫头变形控制与疲劳试验[J]. 航空学报, 2014(7): 2041-2048HE W F, LI Y H, NIE X F, et al. Deformation control and fatigue test of blade tenon by laser shock peening[J]. Acta Aeronautica et Astronautica Sinica, 2014(7): 2041-2048.) |