Journal of Aeronautical Materials
ISSN:1005-5053
Citation: | Haizhou LU, Xuan LUO, Tao CHEN, Zhao LIU, Chao YANG. Recent progress of 4D printing technology[J]. Journal of Aeronautical Materials, 2019, 39(2): 1-9. |
[1] | TIBBITS S, MCKNELLY C, OLGUIN C, et al. 4D printing and universal transformation[C]∥Proceedings of the 34th Annual Conference of the Association for Computer Aided Design in Architecture.Los Angeles: Design Agency, 2014: 539-548. |
[2] | TIBBITS S. 4D printing: multi-material shape change[J]. Architectural Design,2014,84(1):116-121 doi: 10.1002/ad.v84.1 |
[3] | 苏亚东,王向明,吴斌,等. 4D打印技术在航空飞行器研制中的应用潜力[J]. 航空材料学报,2018,38(2):59-69SU Y D,WANG X M,WU B,et al. Application potential of 4D printing technology in development of aircraft[J]. Journal of Aeronautical Materials,2018,38(2):59-69.) |
[4] | 任天宁,朱光明,聂晶. 形状记忆聚合物复合材料可展开结构的研究进展[J]. 航空材料学报,2018,38(4):47-55REN T N,ZHU G M,NIE J. Research progress on deployable structures of shape memory polymer composites[J]. Journal of Aeronautical Materials,2018,38(4):47-55.) |
[5] | 温建强,章力旺. 压电材料的研究新进展[J]. 应用声学,2013,32(5):413-418WEN J Q,ZHANG L W. Progress in piezoelectric materials[J]. Applied Acoustics,2013,32(5):413-418.) |
[6] | 陶宝祺,熊克. 智能材料结构的定义及应用前景[J]. 中国科学基金,1995(2):40-46TAO B Q,XIONG K. Definition and application prospect of intelligent material structure[J]. China Science Foundation,1995(2):40-46.) |
[7] | 谢建宏,张为公,梁大开. 智能材料结构的研究现状及未来发展[J]. 材料导报,2006,20(11):6-9 doi: 10.3321/j.issn:1005-023X.2006.11.008XIE J H,ZHANG W G,LIANG D K. Research status and future development of smart materials and structures[J]. Materials Review,2006,20(11):6-9.) doi: 10.3321/j.issn:1005-023X.2006.11.008 |
[8] | 余海湖,赵愚,姜德生. 智能材料与结构的研究及应用[J]. 武汉理工大学学报,2001,23(11):37-41 doi: 10.3321/j.issn:1671-4431.2001.11.011YU H H,ZHAO Y,JIANG D S. Development and applications of smart materials and structures[J]. Journal of Wuhan University of Technology,2001,23(11):37-41.) doi: 10.3321/j.issn:1671-4431.2001.11.011 |
[9] | BOGUE R. Smart materials: a review of capabilities and applications[J]. Assembly Automation,2014,34(1):16-22 doi: 10.1108/AA-10-2013-094 |
[10] | ZHONG X K,JOANNE E M T,YONG L,et al. 3D printing of smart materials: a review on recent progresses in 4D printing[J]. Virtual and Physical Prototyping,2015,10(3):103-122 doi: 10.1080/17452759.2015.1097054 |
[11] | 任天宁,朱光明,韩阳阳. 电致形状记忆复合材料的制备与性能[J]. 航空材料学报,2018,38(6):57-63REN T N,ZHU G M,HAN Y Y. Preparation and properties of electro-induced shape memory composites[J]. Journal of Aeronautical Materials,2018,38(6):57-63.) |
[12] | 冷劲松,兰鑫,刘彦菊,等. 形状记忆聚合物复合材料及其在空间可展开结构中的应用[J]. 宇航学报,2010,31(4):950-956 doi: 10.3873/j.issn.1000-1328.2010.04.002LENG J S,LAN X,LIU Y J,et al. Shape memory polymers composites and their applicationsin deployable structures[J]. Journal of Astronautics,2010,31(4):950-956.) doi: 10.3873/j.issn.1000-1328.2010.04.002 |
[13] | LEIST S K,ZHOU J. Current status of 4D printing technology and the potential of light-reactive smart materials as 4D printable materials[J]. Virtual and Physical Prototyping,2016,11(4):249-262 doi: 10.1080/17452759.2016.1198630 |
[14] | LEE J,KIM H C,CHOI J W,et al. A review on 3D printed smart devices for 4D printing[J]. International Journal of Precision Engineering and Manufacturing-Green Technology,2017,4(3):373-383 doi: 10.1007/s40684-017-0042-x |
[15] | KIM K,ZHU W,QU X,et al. 3D optical printing of piezoelectric nanoparticle polymer composite materials[J]. ACS Nano,2014,8(10):9799 doi: 10.1021/nn503268f |
[16] | RAVIV D,ZHAO W,MCKNELLY C,et al. Active printed materials for complex self-evolving deformations[J]. Scientific Reports,2014,4(1):7422 |
[17] | ROSSITER J, WALTERS P, STOIMENOV B. Printing 3D dielectric elastomer actuators for soft robotics[C]. California, USA: International Society for Optics and Photonics, 2009. |
[18] | DUBEY V N,DAI J S. A packaging robot for complex cartons[J]. Industrial Robot,2006,33(2):82-87 doi: 10.1108/01439910610651374 |
[19] | ZHAO X,SUO Z. Method to analyze programmable deformation of dielectric elastomer layers[J]. Applied Physics Letters,2008,93(25):251902 doi: 10.1063/1.3054159 |
[20] | KOFOD G,WIRGES W,PAAJANEN M,et al. Energy minimization for self-organized structure formation and actuation[J]. Applied Physics Letters,2007,90(8):081916-081916 doi: 10.1063/1.2695785 |
[21] | BAUER S,BAUER-GOGONEA S,GRAZ I,et al. 25th anniversary article:a soft future: from robots and sensor skin to energy harvesters[J]. Advanced Materials,2014,26(1):149-162 doi: 10.1002/adma.201303349 |
[22] | GE Q,QI H J,DUNN M L. Active materials by four-dimension printing[J]. Applied Physics Letters,2013,103(13):68-225 |
[23] | 王延庆,沈竞兴,吴海全. 3D打印材料应用和研究现状[J]. 航空材料学报,2016,36(4):89-98WANG Y Q,SHEN J X,WU H Q. Application and research status of alternative materials for 3D-printing technology[J]. Journal of Aeronautical Materials,2016,36(4):89-98.) |
[24] | YUAN C,WANG T,DUNN M L,et al. 3D printed active origami with complicated folding patterns[J]. International Journal of Precision Engineering and Manufacturing-green Technology,2017,4(3):281-289 doi: 10.1007/s40684-017-0034-x |
[25] | RAJABI A H,JAFFE M,ARINZEH T L. Piezoelectric materials for tissue regeneration:A review[J]. Acta Biomaterialia,2015,24:12-23 doi: 10.1016/j.actbio.2015.07.010 |
[26] | WEI Z G,R S,MIYAZAKI S. Shape-memory materials and hybrid composites for smart systems:part I:shape-memory materials[J]. Journal of Materials Science,1998,33:3743-37262 doi: 10.1023/A:1004692329247 |
[27] | YU K,RITCHIE A,MAO Y,et al. Controlled sequential shape changing components by 3D printing of shape memory polymer multimaterials[J]. Procedia IUTAM,2015,12:193-203 doi: 10.1016/j.piutam.2014.12.021 |
[28] | GE Q,SAKHAEI A H,LEE H,et al. Multimaterial 4D printing with tailorable shape memory polymers[J]. Scientific Reports,2016,6(1):31110 doi: 10.1038/srep31110 |
[29] | CHOONG Y Y C,MALEKSAEEDI S,ENG H,et al. 4D printing of high performance shape memory polymer using stereolithography[J]. Materials & Design,2017,126:219-225 |
[30] | SEOL Y J,KANG H W,LEE S J,et al. Bioprinting technology and its applications[J]. European Journal of Cardio-Thoracic Surgery,2014,46(3):342-348 doi: 10.1093/ejcts/ezu148 |
[31] | OZBOLAT IT,YUY. Bioprinting toward organ faborication: challenges and future trends[J]. IEEE Transactions on Biomedical Engineering,2013,60(3):691-699 doi: 10.1109/TBME.2013.2243912 |
[32] | AN J,TEOH J E M,SUNTORNNOND R,et al. Design and 3D printing of scaffolds and tissues[J]. Engineering,2015,1(2):261-268 doi: 10.15302/J-ENG-2015061 |
[33] | GLADMAN A S,MATSUMOTO E A,NUZZO R G,et al. Biomimetic 4D printing[J]. Nature Materials,2016,15:413-418 doi: 10.1038/nmat4544 |
[34] | OTSUKA K,REN X. Physical metallurgy of Ti-Ni-based shape memory alloys[J]. Progress in Materials Science,2005,50:511-678 doi: 10.1016/j.pmatsci.2004.10.001 |
[35] | BORMANN T,SCHUMACHER R,BERT M,et al. Tailoring selective laser melting process parameters for NiTi implants[J]. Journal of Materials Engineering and Performance,2012,21(12):2519-2524 doi: 10.1007/s11665-012-0318-9 |
[36] | FRENZEL J,ZHANG Z,SOMSEN C,et al. Influence of Ni on martensitic phase transformations in NiTi shape memory alloys[J]. Acta Materialia,2010,58(9):3444-3458 doi: 10.1016/j.actamat.2010.02.019 |
[37] | CLARE A T,CHALKER P R,DAVIES S,et al. Selective laser melting of high aspect ratio 3D nickel-titanium structures two way trained for MEMS applications[J]. International Journal of Mechanics & Materials in Design,2008,4(2):181-187 |
[38] | DADBAKHSH S,SPEIRS M,KRUTH J,et al. Effect of SLM parameters on transformation temperatures of shape memory nickel titanium parts[J]. Advanced Engineering Materials,2014,16(9):1140-1146 doi: 10.1002/adem.v16.9 |
[39] | DADBAKHSH S,SPEIRS M,VAN H J,et al. Laser additive manufacturing of bulk and porous shape-memory NiTi alloys: from processes to potential biomedical applications[J]. MRS Bull,2016,41:765-774 doi: 10.1557/mrs.2016.209 |
[40] | SHENG L,HANY H,MOATAZ M A,et al. The development of TiNi-based negative Poisson’s ratio structure using selective laser melting[J]. Acta Materialia,2016,105:75-83 doi: 10.1016/j.actamat.2015.12.017 |
[41] | HABERLAND C,ELAHINIA M,WALKER J M,et al. On the development of high quality NiTi shape memory and pseudoelastic parts by additive manufacturing[J]. Smart Materials and Structures,2014,23(10):104002 doi: 10.1088/0964-1726/23/10/104002 |
[42] | MA J,FRANCO B,TAPIA G,et al. Spatial control of functional response in 4D-printed active metallic structures[J]. Scientific Reports,2017,7:46707 doi: 10.1038/srep46707 |
[43] | ELAHINIA M,SHAYESTEH M N,TAHERI A M,et al. Fabrication of NiTi through additive manufacturing: a review[J]. Progress in Materials Science,2016,83:630-663 doi: 10.1016/j.pmatsci.2016.08.001 |
[44] | YANG C,ZHAO Y J,KANG L M,et al. High-strength silicon brass manufactured by selective laser melting[J]. Materials Letters,2018:169-172 |
[45] | MARTIN J H,YAHATA B D,HUNDLEY J M,et al. 3D printing of high-strength aluminium alloys[J]. Nature,2017,549(7672):365 doi: 10.1038/nature23894 |
[46] | DADBAKHSHS,SPEIRS M,KRUTH J P,et al. Influence of SLM on shape memory and compression behaviour of NiTi scaffolds[J]. CIRP Annals - Manufacturing Technology,2015(64):209-212 |
[47] | 程琴荣. 制备工艺对钛系形状记忆合金组织性能的影响研究[D]. 广州: 华南理工大学. 2015.CHENG Q R. Effect of fabrication process on the microstructures and properties of the titanium system shape memory alloys[D]. Guangzhou: South China University of Technology, 2015. |
[48] | SOHEIL S,ALI S T,MOHSEN T A,et al. Texture, aging, and superelasticity of selective laser melting fabricated Ni rich NiTi alloys[J]. Materials Science & Engineering: A,2017,686:1-10 |
[49] | YANG C,KANG L M,LI X X,et al. Bimodal titanium alloys with ultrafine lamellar eutectic structure fabricated by semi-solid sintering[J]. Acta Materialia,2017,491:491-502 |
[50] | YANG C,CHENG Q R,LIU L H,et al. Effect of minor Cu content on microstructure and mechanical property of NiTiCu bulk alloys fabricated by crystallization of metallic glass powder[J]. Intermetallics,2015,56:37-43 doi: 10.1016/j.intermet.2014.08.009 |