Volume 38 Issue 2
Apr.  2018
Turn off MathJax
Article Contents
Article Navigation >  Journal of Aeronautical Materials  > 2018  >  38(2): 70-76
Ya'nan WANG, Fanghui WANG, Zhongming WANG, Jianjun LIU, Hong ZHU. Research Progress and Application Perspectives of 4D Printing[J]. Journal of Aeronautical Materials, 2018, 38(2): 70-76. doi: 10.11868/j.issn.1005-5053.2018.001005
Citation: Ya'nan WANG, Fanghui WANG, Zhongming WANG, Jianjun LIU, Hong ZHU. Research Progress and Application Perspectives of 4D Printing[J]. Journal of Aeronautical Materials, 2018, 38(2): 70-76. 10.11868/j.issn.1005-5053.2018.001005
shu

Research Progress and Application Perspectives of 4D Printing

doi: 10.11868/j.issn.1005-5053.2018.001005

  • State Key Laboratory of Chemical Resource Engineering, Beijing University of Chemical Technology, Beijing 100029, China

  • Received Date: 2017-12-15
  • Rev Recd Date: 2018-01-30
  • Publish Date: 2018-04-01
    Abstract
  • 4D printing technology has attracted people's attention since it came up in 2013. 4D printing is a kind of new manufacturing technology which is based on 3D printing and smart materials. In other word, 4D printing is evolved from 3D printing and aimed at the improvement of structure, property and function. 4D printing predicts that the self-assembly, multifunction and self-healing can be achieved. This paper reviews the whole research progress of 4D printing in time sequence, and summarizes the achievements of this technology in material science, manufacturing industry, bioengineering and medical science. In addition, the application perspectives in this field are also discussed.

     

    • FullText(HTML)
  • loading
    • References(33)
  • [1] RAVIV D, ZHAO W, MCKNELLY C, et al. Active printed materials for complex self-evolving deformations[J]. Scientific Reports, 2014, 4: 7422-7430
    [2] 李涤尘, 刘佳煜, 王延杰, 等. 4D打印——智能材料的增材制造技术[J]. 机电工程技术, 2014, 43(5): 1-9 doi: 10.3969/j.issn.1009-9492.2014.05.001

    LI D C, LIU J Y, WANG Y J, et al. 4D printing—additive manufacturing technology of smart materials[J]. Mechanical & Electrical Engineering Technology, 2014, 43(5): 1-9.) doi: 10.3969/j.issn.1009-9492.2014.05.001
    [3] MOMENI F, LIU X, NI J, et al. A review of 4D printing[J]. Materials & Design, 2017, 122(15): 42-79
    [4] GE Q, DUNN C K, QI H J, et al. Active origami by 4D printing[J]. Smart Materials and Structures, 2014, 23(9): 94007-94022 doi: 10.1088/0964-1726/23/9/094007
    [5] CHAE M P, HUNTER-SMITH D J, DE-SILVA I, et al. Four-dimensional(4D)printing: a new evolution in computed tomography-guided stereolithographic modeling. Principles and application[J]. Journal of Reconstructive Microsurgery, 2015, 31(6): 458-463 doi: 10.1055/s-00000029
    [6] ZHOU Y, HUANG W M, KANG S F, et al. From 3D to 4D printing: approaches and typical applications[J]. Journal of Mechanical Science and Technology, 2015, 29(10): 4281-4288 doi: 10.1007/s12206-015-0925-0
    [7] GLADMAN A S, MATSUMOTO E A, NUZZO R G, et al. Biomimetic 4D printing[J]. Nature Materials, 2016, 15(4): 413-418 doi: 10.1038/nmat4544
    [8] ZHANG Q, ZHANG K, HU G. Smart three-dimensional lightweight structure triggered from a thin composite sheet via 3D printing technique[J]. Scientific Reports, 2016(6): 22431-22439
    [9] MAO Y, DING Z, YUAN C, et al. 3D printed reversible shape changing components with stimuli responsive materials[J]. Scientific Reports, 2016(6): 24761-24774
    [10] WU J, YUAN C, DING Z, et al. Multi-shape active composites by 3D printing of digital shape memory polymers[J]. Scientific Reports, 2016(6): 24224-24235
    [11] GE Q, SAKHAEI A H, LEE H, et al. Multimaterial 4D printing with tailorable shape memory polymers[J]. Scientific Reports, 2016(6): 31110-31121
    [12] MONZON M D, PAZ R, PEI E, et al. 4D printing: processability and measurement of recovery force in shape memory polymers[J]. The International Journal of Advanced Manufacturing Technology, 2017, 89(5/6/7/8): 1827-1836
    [13] MIAO S, ZHU W, CASTRO N J, et al. 4D printing smart biomedical scaffolds with novel soybean oil epoxidized acrylate[J]. Scientific Reports, 2016(6): 27226-27236
    [14] ZAREK M, LAYANI M, COOPERSTEIN I, et al. 3D printing of shape memory polymers for flexible electronic devices[J]. Advanced Materials, 2016, 28(22): 4449-4454 doi: 10.1002/adma.v28.22
    [15] ZAREK M, LAYANI M, ELIAZAR S, et al. 4D printing shape memory polymers for dynamic jewellery and fashionwear[J]. Virtual and Physical Prototyping, 2016, 11(4): 263-270 doi: 10.1080/17452759.2016.1244085
    [16] DING Z, YUAN C, PENG X, et al. Direct 4D printing via active composite materials[J]. Science Advances, 2017, 3(4): 602890-1602896
    [17] HUANG L, JIANG R, WU J, et al. Ultrafast digital printing toward 4D shape changing materials[J]. Advanced Materials, 2017, 29(7): 1605390-1605396 doi: 10.1002/adma.201605390
    [18] YANG H, LEOW W R, WANG T, et al. 3D Printed photoresponsive devices based on shape memory composites[J]. Advanced Materials, 2017, 29(33): 1701627-1701634 doi: 10.1002/adma.v29.33
    [19] NAFICY S, GATELYT R, GORIN R, et al. 4D printing of reversible shape morphing hydrogel structures[J]. Macromolecular Materials and Engineering, 2017, 302(1): 1600212-1600221 doi: 10.1002/mame.v302.1
    [20] CHOONG Y Y C, MALEKSAEEDI S, ENG H, et al. 4D printing of high performance shape memory polymer using stereolithography[J]. Materials & Design, 2017, 126(15): 219-225
    [21] LIU Y, SHAW B, DICKEY M D, et al. Sequential self-folding of polymer sheets[J]. Science Advances, 2017, 3(3): 1602417-1602424 doi: 10.1126/sciadv.1602417
    [22] ZHAO Z, WU J, MU X, et al. Origami by frontal photopolymerization[J]. Science Advances, 2017, 3(4): 1602326-1602333 doi: 10.1126/sciadv.1602326
    [23] WANG W, YAO L, CHENG C Y, et al. Harnessing the hygroscopic and biofluorescent behaviors of genetically tractable microbial cells to design biohybrid wearables[J]. Science Advances, 2017, 3(5): 1601984-1601992 doi: 10.1126/sciadv.1601984
    [24] WANG W, YAO L, ZHANG T, et al. Transformative appetite: shape-changing food transforms from 2D to 3D by water interaction through cooking[C]//Proceedings of the 2017 CHI Conference on Human Factors in Computing Systems. Toronto, Canada: ACM, 2017: 6123-6132.
    [25] LI X, LI X, SHANG J, et al. Intelligent materials: a review of applications in 4D printing[J]. Assembly Automation, 2017, 37(2): 170-185 doi: 10.1108/AA-11-2015-093
    [26] KHOO Z X, TEOH J E M, LIU Y, et al. 3D printing of smart materials: a review on recent progresses in 4D printing[J]. Virtual and Physical Prototyping, 2015, 10(3): 103-122 doi: 10.1080/17452759.2015.1097054
    [27] 冷劲松, 孙健, 刘彦菊. 智能材料和结构在变体飞行器上的应用现状与前景展望[J]. 航空学报, 2014, 35(1): 29-45

    LENG J S, SUN J, LIU Y J. Application status and future prospect of smart materials and structures in morphing aircraft[J]. Acta Aeroautica et Astronautica Sinica, 2014, 35(1): 29-45.)
    [28] LIU Y, DU H, LIU L, et al. Shape memory polymers and their composites in aerospace applications: a review[J]. Smart Materials and Structures, 2014, 23(2): 23001-23023 doi: 10.1088/0964-1726/23/2/023001
    [29] LENG J, XIR F, WU X, et al. Effect of the γ-radiation on the properties of epoxy-based shape memory polymers[J]. Journal of Intelligent Material Systems and Structures, 2014, 25(10): 1256-1263 doi: 10.1177/1045389X13504474
    [30] SOKOLOWSKI W M. TAN S C Advanced self-deployable structures for space applications[J]. Journal of Spacecraft and Rockets, 2007, 44(4): 750-754 doi: 10.2514/1.22854
    [31] SUN L, HUANG W M, DING Z, et al. Stimulus-responsive shape memory materials: a review[J]. Materials & Design, 2012, 33: 577-640
    [32] MA J, KARAMAN I, NOEBE R D. High temperature shape memory alloys[J]. International Materials Reviews, 2010, 55(5): 257-315 doi: 10.1179/095066010X12646898728363
    [33] KHAN M I, PEQUEGNAT A, ZHOU Y N. Multiple memory shape memory alloys[J]. Advanced Engineering Materials, 2013, 15(5): 386-393 doi: 10.1002/adem.v15.5
    • Relative Articles
    • Supplements(0)
    • Cited By
  • 加载中

Catalog

    通讯作者: 陈斌, bchen63@163.com
    • 1. 

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索

    Figures(9)

    Get Citation
    PDF
    XML

    Article Metrics

    Article views (8181) PDF downloads(248) Cited by()
    Proportional views
    Related

    Copyright © 2015 Editorial Board of Journal of Aeronautical Materials

    京ICP备15058934号-1

    Address：P.Q.BOX 81-44,Beijing 100095,China

     E-mail：info@hkclxb.cn

    Supported by Beijing Renhe Information Technology Co. Ltd   百度统计

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return