Volume 40 Issue 2
Mar.  2020
Turn off MathJax
Article Contents
Article Navigation >  Journal of Aeronautical Materials  > 2020  >  40(2): 1-7
Yue WANG, Wenyong XU, Na LIU, Liang ZHENG, Hua YUAN, Zhou LI, Guoqing ZHANG. Deformation mechanism and microstructure evolution of hot extruded GH738 alloy fabricated by spray forming[J]. Journal of Aeronautical Materials, 2020, 40(2): 1-7. doi: 10.11868/j.issn.1005-5053.2019.000085
Citation: Yue WANG, Wenyong XU, Na LIU, Liang ZHENG, Hua YUAN, Zhou LI, Guoqing ZHANG. Deformation mechanism and microstructure evolution of hot extruded GH738 alloy fabricated by spray forming[J]. Journal of Aeronautical Materials, 2020, 40(2): 1-7. 10.11868/j.issn.1005-5053.2019.000085
shu

Deformation mechanism and microstructure evolution of hot extruded GH738 alloy fabricated by spray forming

doi: 10.11868/j.issn.1005-5053.2019.000085

  • Science and Technology on Advanced High Temperature Structural Materials Laboratory，AECC Beijing Institute of Aeronautical Materials，Beijing 100095，China

  • Received Date: 2019-05-27
  • Rev Recd Date: 2020-01-25
    • Available Online: 2020-03-16
  • Publish Date: 2020-04-01
    Abstract
  • The research on hot deformation including flow behavior, microstructure evolution via EBSD method and the constitutive characteristic model of hot extruded GH738 alloy fabricated by spray forming was conducted by using Gleeble-3500TM simulator at the temperature range of 950~1150 ℃, strain rate range of 0.001~1 s–1 and engineering strain of 50%. The results show that the flow stress decreases with increasing of the deformation temperature and decreasing of the strain rate. The peak flow stress of coarse grain GH738 is higher than that of fine grain within the extruded GH738 alloy. The activation energy Q of extruded GH738 alloy is 651.08 kJ·mol–1. The hot deformation activation energy Q of GH738 alloy is tending to increasing with the decreasing of the original average grain size. The microstructure evolutes from original stretched grain to equiaxed grain with the increasing deformation temperature through the onset of recrystallization. The full dynamic recrystallization microstructure is obtained at the temperature above 1000 ℃ and the microstructure tend to coarsen with the higher deformation temperature.

     

    • FullText(HTML)
  • loading
    • References(15)
  • [1] 董建新. 高温合金GH738及应用[M]. 北京: 冶金工业出版社, 2014.

    DONG J X. Superalloy GH738 and its applications[M]. Beijing: Metallurgical Industry Press, 2014.
    [2] YAO Z H,ZHANG M C,DONG J X. Stress rupture fracture model and microstructure evolution for waspaloy[J]. Metallurgical and Materials Transactions A,2013,44(7):3084-3098. doi: 10.1007/s11661-013-1660-8
    [3] CHAMANFAR A,JAHAZI M,GHOLIPOUR J,et al. Evolution of flow stress and microstructure during isothermal compression of waspaloy[J]. Materials Science & Engineering:A,2014,615:497-510.
    [4] AMIRI A,BRUSCHI S,SADEGHI M H,et al. Investigation on hot deformation behavior of waspaloy[J]. Materials Science & Engineering:A,2013,562:77-82.
    [5] WANG L,YANG G,LEI T,et al. Hot deformation behavior of GH738 for A-USC turbine blades[J]. Journal of Iron and Steel Research,International,2015,22(11):1043-1048. doi: 10.1016/S1006-706X(15)30110-2
    [6] 姚志浩,董建新,张麦仓. GH738高温合金热变形过程显微组织控制与预测I组织演化模型的构建[J]. 金属学报,2011,47(12):1581-1590.

    YAO Z H,DONG J X,ZHANG M C. Microstructure control and prediction of GH738 superalloy during hot deformation I construction of microstructure evolution model[J]. Acta Metallurgica Sinica,2011,47(12):1581-1590.
    [7] 陈舒恬,王珏,胡定祥. GH738合金双锥试样热压缩行为[J]. 材料热处理学报,2016,37(12):80-85.

    CHEN S T,WANG J,HU D X. Hot compression behaviors of double cone samples of GH738 alloy[J]. Transactions of Materials and Heat Treatment,2016,37(12):80-85.
    [8] 王悦,许文勇,刘娜,等. 喷射成形GH738合金热变形特性及微观组织演变[J]. 稀有金属材料与工程,2018,47(3):878-883.

    WANG Y,XU W Y,LIU N,et al. Deformation characteristic and microstructure evolution of spray formed GH738 alloy[J]. Rare Metal Materials and Engineering,2018,47(3):878-883.
    [9] 潘崇超,李殿过,凌刚,等. Fe-15Cr-25Ni高温合金热压缩变形条件下的流变应力模型[J]. 材料工程,2005(6):7-10. doi: 10.3969/j.issn.1001-4381.2005.06.002

    PAN C C,LI D G,LING G,et al. Model for flow stress of Fe-15Cr-25Ni superalloy under hot compression[J]. Journal of Materials Engineering,2005(6):7-10. doi: 10.3969/j.issn.1001-4381.2005.06.002
    [10] 李卿,郭鸿振,王彦伟,等. GH4049合金的热变形行为及组织演变[J]. 材料工程,2014(12):55-59. doi: 10.11868/j.issn.1001-4381.2014.12.010

    LI Q,GUO H Z,WANG Y W,et al. Hot deformation behaviors and microstructure evolution of GH4049 alloy[J]. Journal of Materials Engineering,2014(12):55-59. doi: 10.11868/j.issn.1001-4381.2014.12.010
    [11] 吴凯,刘国权,胡本芙,等. 新型镍基粉末高温合金的高温变形行为[J]. 航空材料学报,2010,30(4):1-7. doi: 10.3969/j.issn.1005-5053.2010.4.001

    WU K,LIU G Q,HU B F,et al. Research on high temperature deformation behavior of new type nickel-based P/M superalloy[J]. Journal of Aeronautical Materials,2010,30(4):1-7. doi: 10.3969/j.issn.1005-5053.2010.4.001
    [12] PU E X,ZHENG W J,SONG Z G,et al. Hot deformation characterization of nickel-based superalloy UNS10276 through processing map and microstructural studies[J]. Journal of Alloys and Compounds,2017,694:617-631. doi: 10.1016/j.jallcom.2016.10.029
    [13] 何国爱,丁晗晖,刘琛仄,等. 粉末特性对镍基粉末冶金高温合金组织及热变形行为的影响[J]. 中国有色金属学报,2016,26(1):37-49.

    HE G A,DING H H,LIU C Z,et al. Effects of powder characteristics on microstructure and deformation activation energy of nickel based superalloy[J]. The Chinese Journal Of Nonferrous Metals,2016,26(1):37-49.
    [14] 李立新,唐力,周家林,等. 碳含量及晶粒尺寸对微合金钢激活能的影响[J]. 特殊钢,2003,24(3):24-26. doi: 10.3969/j.issn.1003-8620.2003.03.007

    LI L X,TANG L,ZHOU J L,et al. Influence of carbon content and grain size on activation energy of microalloy steel[J]. Special Steel,2003,24(3):24-26. doi: 10.3969/j.issn.1003-8620.2003.03.007
    [15] 姚志浩,董建新,张麦仓. GH738高温合金热加工行为[J]. 稀有金属材料与工程,2013,42(6):1199-1204. doi: 10.3969/j.issn.1002-185X.2013.06.022

    YAO Z H,DONG J X,ZHANG M C. Hot deformation behavior of superalloy GH738[J]. Rare Metal Materials and Engineering,2013,42(6):1199-1204. doi: 10.3969/j.issn.1002-185X.2013.06.022
    • Relative Articles
    • Supplements(0)
    • Cited By
  • 加载中

Catalog

    通讯作者: 陈斌, bchen63@163.com
    • 1. 

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索

    Figures(6)  / Tables(2)

    Get Citation
    PDF
    XML

    Article Metrics

    Article views (4167) PDF downloads(32) Cited by()
    Proportional views
    Related

    Copyright © 2015 Editorial Board of Journal of Aeronautical Materials

    京ICP备15058934号-1

    Address：P.Q.BOX 81-44,Beijing 100095,China

     E-mail：info@hkclxb.cn

    Supported by Beijing Renhe Information Technology Co. Ltd   百度统计

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return