[1] |
李劲风,宁红,刘丹阳,等. Al-Cu-Li系铝锂合金的合金化与微合金化[J]. 中国有色金属学报,2021,31(2):258-279. doi: 10.11817/j.ysxb.1004.0609.2021-36619LI J F,NING H,LIU D Y,et al. Alloying and micro-alloying in Al-Cu-Li series alloys[J]. The Chinese Journal of Nonferrous Metals,2021,31(2):258-279. doi: 10.11817/j.ysxb.1004.0609.2021-36619
|
[2] |
李劲风,陈永来,马云龙,等. 国内铝锂合金基础研究及应用技术开发[J]. 宇航材料工艺,2021,51(4):37-47. doi: 10.12044/j.issn.1007-2330.2021.04.005LI J F,CHEN Y L,MA Y L,et al. Basic research and application technology development of Al-Li alloy in china[J]. Journal of Aerospace Materials and Technology,2021,51(4):37-47. doi: 10.12044/j.issn.1007-2330.2021.04.005
|
[3] |
RIOJA R J,LIU J. The evolution of Al-Li base products for aerospace and space applications[J]. Metallurgical and Materials Transaction A,2012,43(9):3325-3337. doi: 10.1007/s11661-012-1155-z
|
[4] |
郑子樵,李劲风,陈志国,等. 铝锂合金的合金化与微观组织演化[J]. 中国有色金属学报,2011,21(10):2337-2351. doi: 10.19476/j.ysxb.1004.0609.2011.10.004ZHENG Z Q,LI J F,CHEN Z G,et al. Alloying and microstructural evolution of Al-Li alloys[J]. The Chinese Journal of Nonferrous Metals,2011,21(10):2337-2351. doi: 10.19476/j.ysxb.1004.0609.2011.10.004
|
[5] |
GUO Y J,LI J F,LU D D,et al. Characterization of Al3Zr precipitation via double-step homogenization and recrystallization behavior after subsequent deformation in 2195 Al-Li alloy[J]. Materials Characterization,2021,182:111549. doi: 10.1016/j.matchar.2021.111549
|
[6] |
PAN Z R,ZHENG Z Q,LIAO Z Q,et al. New cubic precipitate in Al-3.5Cu-1.0Li-0.5In (wt. %) alloy[J]. Materials Letters,2010,64:942-944. doi: 10.1016/j.matlet.2010.01.066
|
[7] |
ZHANG X L,WU G H,ZHANG L,et al. Effects of Mg and Sc additions on the microstructure, mechanical properties, and thermal stability of a cast Al-2Li-2Cu-0.2Zr alloy after thermal exposure[J]. Journal of Alloys and Compounds,2019,788:367-382. doi: 10.1016/j.jallcom.2019.02.062
|
[8] |
WANG Y X,MA X W,ZHAO G Q,et al. Microstructure evolution of spray deposited and as-cast 2195 Al-Li alloys during homogenization[J]. Journal of Materials Science & Technology,2021,82:161-178.
|
[9] |
王硕,张弛,王俊升. 铝锂合金纳米析出相结构与性能综述[J]. 航空制造技术,2021,64(9):68-76,92. doi: 10.16080/j.issn1671-833x.2021.09.068WANG S,ZHANG C,WANG J S. Structures and properties of nano-precipitates in Al-Li alloys[J]. Aeronautical Manufacturing Technology,2021,64(9):68-76,92. doi: 10.16080/j.issn1671-833x.2021.09.068
|
[10] |
DURSUN T,SOUTIS C. Recent developments in advanced aircraft aluminum alloys[J]. Materials & Design,2014,56:862-871.
|
[11] |
DESCHAMPS A,DECREUS H,GEUSER F D,et al. The influence of precipitation on plastic deformation of Al-Cu-Li alloys[J]. Acta Materialia,2013,61:4010-4021. doi: 10.1016/j.actamat.2013.03.015
|
[12] |
TAO J S,ZHANG L,WU G H,et al. Effect of heat treatment on the microstructure and mechanical properties of extruded Al-4Cu-1Li-0.4Mg-0.4Ag-0.18Zr alloy[J]. Materials Science & Engineering:A,2018,717:11-19.
|
[13] |
XIANG S,LIU D Y,ZHU R H,et al. Hot deformation behavior and microstructure evolution of 1460 Al-Li alloy[J]. Transactions of Nonferrous Metals Society of China,2015,25(12):3855-3864. doi: 10.1016/S1003-6326(15)64033-X
|
[14] |
WANG Y X,ZHAO G Q,XU X,et al. Microstructures and mechanical properties of spray deposited 2195 Al-Cu-Li alloy through thermo-mechanical processing[J]. Materials Science & Engineering:A,2018,727:78-89.
|
[15] |
MA Y L,LI J F,SANG F J,et al. Grain structure and tensile property of Al-Li alloy sheet caused by different cold rolling reduction[J]. Transactions of Nonferrous Metals Society of China,2019,29(8):1569-1582. doi: 10.1016/S1003-6326(19)65064-8
|
[16] |
ZHU F J,WU H Y,LEE S,et al. Dynamic behavior of a 6069 Al alloy under hot compression[J]. Materials Science & Engineering A,2015,640:385-393.
|
[17] |
HUANG K,LOGé R E. A review of dynamic recrystallization phenomena in metallic materials[J]. Materials & Design,2016,111:548-574.
|
[18] |
SAKAI T,MIURA H,GOLOBORODKO A,et al. Continuous dynamic recrystallization during the transient severe deformation of aluminum alloy 7475[J]. Acta Materialia,2009,57(1):153-162. doi: 10.1016/j.actamat.2008.09.001
|
[19] |
SAKAI T,BELYAKOV A,KAIBYSHEV R,et al. Dynamic and post-dynamic recrystallization under hot, cold and severe plastic deformation conditions[J]. Progress in Materials Science,2014,60:130-207. doi: 10.1016/j.pmatsci.2013.09.002
|
[20] |
SHEN B,DENG L,WANG X Y. A new dynamic recrystallisation model of an extruded Al-Cu-Li alloy during high-temperature deformation[J]. Materials Science & Engineering:A,2015,625:288-295.
|
[21] |
李旭,杨庆波,樊祥泽,等. 变形参数对2195 Al-Li合金动态再结晶的影响[J]. 金属学报,2019,55(6):709-719. doi: 10.11900/0412.1961.2018.00430LI X,YANG Q B,FAN X Z,et al. Influence of deformation parameters on dynamic recrystallization of 2195 Al-Li alloy[J]. Acta Metallurgica Sinica,2019,55(6):709-719. doi: 10.11900/0412.1961.2018.00430
|
[22] |
WANG Y X,ZHAO G Q. Hot extrusion processing of Al-Li alloy profiles and related issues: a review[J]. Chinese Journal of Mechanical Engineering,2020,33(1):1-24. doi: 10.1186/s10033-019-0427-6
|
[23] |
CRAM D G,ZUROB H S,BRECHET Y J M,et al. Modelling discontinuous dynamic recrystallization using a physically based model for nucleation[J]. Acta Materialia,2009,57(17):5218-5228. doi: 10.1016/j.actamat.2009.07.024
|
[24] |
CAO Z H,SUN Y,ZHOU C,et al. Cellular automaton simulation of dynamic recrystallization behavior in V-10Cr-5Ti alloy under hot deformation conditions[J]. Transactions of Nonferrous Metals Society of China,2019,29(1):98-111. doi: 10.1016/S1003-6326(18)64919-2
|
[25] |
WANG Y X,ZHAO G Q,XU X,et al. Constitutive modeling, processing map establishment and microstructure analysis of spray deposited Al-Cu-Li alloy 2195[J]. Journal of Alloys and Compounds,2019,779:735-751. doi: 10.1016/j.jallcom.2018.11.289
|
[26] |
SUN Z C,WU H L,CAO J,et al. Modeling of continuous dynamic recrystallization of Al-Zn-Cu-Mg alloy during hot deformation based on the internal-state-variable (ISV) method[J]. International Journal of Plasticity,2018,106:73-87. doi: 10.1016/j.ijplas.2018.03.002
|
[27] |
CSANáDI T,CHINH N Q,GUBICZA J,et al. Characterization of stress-strain relationships in Al over a wide range of testing temperatures[J]. International Journal of Plasticity,2014,54:178-192. doi: 10.1016/j.ijplas.2013.08.014
|
[28] |
MCQUEEN H J,JONAS J J. Recovery and recrystallization during high temperature deformation[J]. Treatise on Materials Science and Technology,1975,6:393-493.
|
[29] |
MCQUEEN H J. Development of dynamic recrystallization theory[J]. Materials Science & Engineering:A,2004,387-389:203-208.
|
[30] |
ZHU R H,LIU Q,LI J F,et al. Dynamic restoration mechanism and physically based constitutive model of 2050 Al-Li alloy during hot compression[J]. Journal of Alloys and Compounds,2015,650:75-85. doi: 10.1016/j.jallcom.2015.07.182
|
[31] |
ZHANG J J,YI Y P,HUANG S Q,et al. Dynamic recrystallization mechanisms of 2195 aluminum alloy during medium/high temperature compression deformation[J]. Materials Science & Engineering:A,2021,804:140650.
|
[32] |
GUO Y J,LI J F,LU D D,et al. Effects of dynamic precipitation and processing parameters on dynamic recrystallization behavior of 2195 Al-Cu-Li alloy during hot compression[J]. Journal of Materials Engineering and Performance,2022,31:2743-2760. doi: 10.1007/s11665-021-06390-z
|
[33] |
LI Y B,GU B,JIANG S,et al. A CDRX-based material model for hot deformation of aluminium alloys[J]. International Journal of Plasticity,2020,134:102844. doi: 10.1016/j.ijplas.2020.102844
|
[34] |
CHEN S F,LI D Y,ZHANG S H,et al. Modelling continuous dynamic recrystallization of aluminum alloys based on the polycrystal plasticity approach[J]. International Journal of Plasticity,2020,131:102710. doi: 10.1016/j.ijplas.2020.102710
|
[35] |
YANG Q B,WANG X Z,LI X,et al. Hot deformation behavior and microstructure of AA2195 alloy under plane strain compression[J]. Materials Characterization,2017,131:500-507. doi: 10.1016/j.matchar.2017.06.001
|
[36] |
DOHERTY R D,HUGHES D A,HUMPHREYS F J,et al. Current issues in recrystallization: a review[J]. Materials Science & Engineering:A,1997,238(2):219-274.
|
[37] |
NING J,LI Q,ZOU Z Y,et al. Hot tensile deformation behavior and microstructural evolution of 2195 Al-Li alloy[J]. Vacuum,2021,188:110176. doi: 10.1016/j.vacuum.2021.110176
|
[38] |
NAYAN N,MAHESH S,PRASAD M J N V,et al. A phenomenological hardening model for an aluminium-lithium alloy[J]. International Journal of Plasticity,2019,118:215-232. doi: 10.1016/j.ijplas.2019.02.009
|
[39] |
ZHU R H,LIU Q,LI J F,et al. Flow curve correction and processing map of 2050 Al-Li alloy[J]. Transactions of Nonferrous Metals Society of China,2018,28(3):404-414. doi: 10.1016/S1003-6326(18)64674-6
|
[40] |
ZHAO P Y,LOW T S E,WANG Y Z,et al. An integrated full-field model of concurrent plastic deformation and microstructure evolution: application to 3D simulation of dynamic recrystallization in polycrystalline copper[J]. International Journal of Plasticity,2016,80:38-55. doi: 10.1016/j.ijplas.2015.12.010
|
[41] |
LI Q,NING J,CHEN L,et al. The mechanical response and microstructural evolution of 2195 Al-Li alloy during hot tensile deformation[J]. Journal of Alloys and Compounds,2020,848:156515. doi: 10.1016/j.jallcom.2020.156515
|
[42] |
ZHANG J J,YI Y P,HE H L,et al. Kinetic model for describing continuous and discontinuous dynamic recrystallization behaviors of 2195 aluminum alloy during hot deformation[J]. Materials Characterization,2021,181:111492. doi: 10.1016/j.matchar.2021.111492
|
[43] |
RAAB G J,VALIEV R Z,LOWE T C,et al. Continuous processing of ultrafine grained Al by ECAP-Conform[J]. Materials Science & Engineering:A,2004,382(1/2):30-34.
|
[44] |
BECK P A,SPERRY P R. Strain induced grain boundary migration in high purity aluminum[J]. Journal of applied physics,1950,21(2):150-152. doi: 10.1063/1.1699614
|
[45] |
ZENER C,HOLLOMON J H. Effect of strain rate upon plastic flow of steel[J]. Journal of Applied Physics,1944,15(1):22-32. doi: 10.1063/1.1707363
|
[46] |
LI Y P,ONODERA E,MATSUMOTO H,et al. Correcting the stress-strain curve in hot compression process to high strain level[J]. Metallurgical and Materials Transactions A,2009,40(5):982-990.
|
[47] |
PANTLEON W,FRANCKE D,KLIMANEK P. Modelling adiabatic heating during high-speed deformation[J]. Computational Materials Science,1996,7(1):75-81.
|
[48] |
WRIGHT S I,NOWELL M M,FIELD D P. A review of strain analysis using electron backscatter diffraction[J]. Microscopy & Microanalysis,2011,17(3):316-329.
|
[49] |
FAN G H,ZHANG Y B,DRIVER J H,et al. Oriented growth during recrystallization revisited in three dimensions[J]. Scripta Materialia,2014,72-73:9-12. doi: 10.1016/j.scriptamat.2013.09.031
|
[50] |
ZAAFARANI N,RAABE D,SINGH R N,et al. Three-dimensional investigation of the texture and microstructure below a nanoindent in a Cu single crystal using 3D EBSD and crystal plasticity finite element simulations[J]. Acta Materialia,2006,54(7):1863-1876. doi: 10.1016/j.actamat.2005.12.014
|
[51] |
LU W J,LIEBSCHER C H,YAN F K,et al. Interfacial nanophases stabilize nanotwins in high-entropy alloys[J]. Acta Materialia,2020,185:218-232. doi: 10.1016/j.actamat.2019.12.010
|
[52] |
胡赓祥, 蔡珣, 戎咏华. 材料科学基础[M]. 第三版. 上海: 上海交通大学出版社, 2010.HU G X, CAI X, RONG Y H. Fundamentals of materials science [M]. 3rd ed. Shanghai: Shanghai Jiao Tong University Press, 2010.
|
[53] |
SHANG S L,ZACHERL C L,FANG H Z,et al. Effects of alloying element and temperature on the stacking fault energies of dilute Ni-base superalloys[J]. Journal of Physics Condensed Matter,2012,24(50):505403. doi: 10.1088/0953-8984/24/50/505403
|
[54] |
MURR L E. Phenomena in Metals and Alloys [M]. Boston: Addison-Wesley Press, 1975.
|
[55] |
TSIVOULAS D,ROBSON J D,SIGLI C,et al. Interactions between zirconium and manganese dispersoid-forming elements on their combined addition in Al-Cu-Li alloys[J]. Acta Materialia,2012,60(13/14):5245-5259.
|
[56] |
TSIVOULAS D,ROBSON J D. Heterogeneous Zr solute segregation and Al3Zr dispersoid distributions in Al-Cu-Li alloys[J]. Acta Materialia,2015,93:73-86. doi: 10.1016/j.actamat.2015.03.057
|
[57] |
TSIVOULAS D,PRANGNELL P B. The effect of Mn and Zr dispersoid-forming additions on recrystallization resistance in Al-Cu-Li AA2198 sheet[J]. Acta Materialia,2014,77:1-16. doi: 10.1016/j.actamat.2014.05.028
|
[58] |
WU H,WEN S P,HUANG H,et al. Effects of homogenization on precipitation of Al3(Er, Zr) particles and recrystallization behavior in a new type Al-Zn-Mg-Er-Zr alloy[J]. Materials Science & Engineering:A,2017,689:313-322.
|
[59] |
DENG Y L,XU J J,CHEN J Q,et al. Effect of double-step homogenization treatments on the microstructure and mechanical properties of Al-Cu-Li-Zr alloy[J]. Materials Science & Engineering:A,2020,795:139975.
|
[60] |
KNIPLING K E,DUNAND D C,SEIDMAN D N. Precipitation evolution in Al-Zr and Al-Zr-Ti alloys during isothermal aging at 375~425 ℃[J]. Acta Materialia,2008,56(1):114-127. doi: 10.1016/j.actamat.2007.09.004
|
[61] |
AARON H B,KOTLER G R. Second phase dissolution[J]. Metallurgical Transactions,1971,2:393-408. doi: 10.1007/BF02663326
|
[62] |
ZHENG X W,LUO P,CHU Z H,et al. Plastic flow behavior and microstructure characteristics of light-weight 2060 Al-Li alloy[J]. Materials Science & Engineering:A,2018,736:465-471.
|
[63] |
LIU Q B,FAN G L,TAN Z Q,et al. Precipitation of Al3Zr by two-step homogenization and its effect on the recrystallization and mechanical property in 2195 Al-Cu-Li alloys[J]. Materials Science & Engineering:A,2021,821:141637.
|
[64] |
NES E,RYUM N,HUNDERI O. On the zener drag[J]. Acta Metallurgica,1985,33(1):11-22. doi: 10.1016/0001-6160(85)90214-7
|
[65] |
ROBSON J D,PRANGNELL P B. Dispersoid precipitation and process modelling in zirconium containing commercial aluminium alloys[J]. Acta Materialia,2001,49(4):599-613. doi: 10.1016/S1359-6454(00)00351-7
|
[66] |
ROBSON J D. Optimizing the homogenization of zirconium containing commercial aluminium alloys using a novel process model[J]. Materials Science & Engineering:A,2002,338(1):219-229.
|
[67] |
HIGGINSON R,BATE P. Substructure drag effects and recrystallization textures in aluminium[J]. Acta Materialia,1999,47(4):1079-1090. doi: 10.1016/S1359-6454(99)00012-9
|
[68] |
SHE H,SHU D,DONG A P,et al. Relationship of particle stimulated nucleation, recrystallization and mechanical properties responding to Fe and Si contents in hot-extruded 7055 aluminum alloys[J]. Journal of Materials Science & Technology,2019,35(11):2570-2581.
|
[69] |
HUANG K,MARTHINSEN K,ZHAO Q L,et al. The double-edge effect of second-phase particles on the recrystallization behaviour and associated mechanical properties of metallic materials[J]. Progress in Materials Science,2018,92:284-359. doi: 10.1016/j.pmatsci.2017.10.004
|
[70] |
JONAS J J,SELLARS C M,TEGART W J M. Strength and structure under hot-working conditions[J]. Metallurgical Reviews,1969,14:1-24.
|
[71] |
YANG X S,CHAI L J,HUANG W J. EBSD analysis on restoration mechanism of as-extruded AA2099 Al-Li alloy after various thermomechanical processes[J]. Materials Chemistry and Physics,2017,191(15):99-105.
|
[72] |
LIU W Y,ZHAO H,LI D,et al. Hot deformation behavior of AA7085 aluminum alloy during isothermal compression at elevated temperature[J]. Materials Science & Engineering:A,2014,596:176-182.
|
[73] |
JHA J S,TOPPO S P,SINGH R,et al. Flow stress constitutive relationship between lamellar and equiaxed microstructure during hot deformation of Ti-6Al-4V[J]. Journal of Materials Processing Technology,2019,270:216-227. doi: 10.1016/j.jmatprotec.2019.02.030
|
[74] |
JONAS J J,QUELENNEC X,JIANG L,et al. The Avrami kinetics of dynamic recrystallization[J]. Acta Materialia,2009,57(9):2748-2756. doi: 10.1016/j.actamat.2009.02.033
|
[75] |
HUANG K,LOGé R E. A review of dynamic recrystallization phenomena in metallic materials[J]. Materials and Design,2016,111:548-574. doi: 10.1016/j.matdes.2016.09.012
|
[76] |
GALINDO-NAVA E I,RIVERA-Dı´AZ-DEL-CASTILLO P E J. Grain size evolution during discontinuous dynamic recrystallization[J]. Scripta Materialia,2014,72-73:1-4. doi: 10.1016/j.scriptamat.2013.09.020
|
[77] |
CHANG C I,LEE C J,HUANG J C. Relationship between grain size and Zener-Holloman parameter during friction stir processing in AZ31 Mg alloys[J]. Scripta Materialia,2004,51(6):509-514. doi: 10.1016/j.scriptamat.2004.05.043
|
[78] |
GALIYEV A,KAIBYSHEV R,GOTTSTEIN G. Correlation of plastic deformation and dynamic recrystallization in magnesium alloy ZK60[J]. Acta Materialia,2001,49(7):1199-1207. doi: 10.1016/S1359-6454(01)00020-9
|
[79] |
SANJARI M,FARZADFAR S A,JUNG I H,et al. Influence of strain rate on hot deformation behaviour and texture evolution of AZ31B[J]. Materials Science and Technology,2012,28(4):437-447. doi: 10.1179/1743284711Y.0000000080
|
[80] |
BLAZ L, SAKAI T, JONAS J J. Effect of initial grain size on dynamic recrystallization of copper [J]. Metal Science 1983, 17(12): 609-616.
|
[81] |
DEHGHAN-MANSHADI A,BARNETT M R,HODGSON P D. Hot deformation and recrystallization of austenitic stainless steel: part I. dynamic recrystallization[J]. Metallurgical and Materials Transactions A,2008,39(6):1359-1370. doi: 10.1007/s11661-008-9512-7
|
[82] |
HOGG S C,PALMER I G,THOMAS L G,et al. Processing, microstructure and property aspects of a spraycast Al-Mg-Li-Zr alloy[J]. Acta Materialia,2007,55(6):1885-1894. doi: 10.1016/j.actamat.2006.10.057
|
[83] |
NIE J F,SHIN K S,ZENG Z R. Microstructure, deformation, and property of wrought magnesium alloys[J]. Metallurgical and Materials Transaction A,2020,51(12):6045-6109. doi: 10.1007/s11661-020-05974-z
|
[84] |
JONAS J J,TóTH L S. Modelling the texture changes produced by dynamic recrystallization[J]. Scripta Metallurgica et Materialia,1992,27(3):359-363. doi: 10.1016/0956-716X(92)90526-K
|
[85] |
HUANG Y,HUMPHREYS F J. Measurements of grain boundary mobility during recrystallization of a single-phase aluminium alloy[J]. Acta Materialia,1999,47(7):2259-2268. doi: 10.1016/S1359-6454(99)00062-2
|
[86] |
SITDIKOV O,SAKAI T,MIURA H,et al. Temperature effect on fine-grained structure formation in high-strength Al alloy 7475 during hot severe deformation[J]. Materials Science & Engineering:A,2009,516(1):180-188.
|
[87] |
GOURDET S,MONTHEILLET F. An experimental study of the recrystallization mechanism during hot deformation of aluminium[J]. Materials Science & Engineering:A,2000,283(1):274-288.
|
[88] |
KAIBYSHEV R,SHIPILOVA K,MUSIN F,et al. Continuous dynamic recrystallization in an Al-Li-Mg-Sc alloy during equal-channel angular extrusion[J]. Materials Science & Engineering:A,2005,396(1):341-351.
|
[89] |
WHITE S H. The effects of strain on the microstructures, fabrics, and deformation mechanisms in quartzites[J]. Philosophical Transactions of the Royal Society of London Series A,1976,283(1312):69-86. doi: 10.1098/rsta.1976.0070
|
[90] |
TOTH L S,ESTRIN Y,LAPOVOK R,et al. A model of grain fragmentation based on lattice curvature[J]. Acta Materialia,2010,58(5):1782-1794. doi: 10.1016/j.actamat.2009.11.020
|
[91] |
YANG Y,CHEN Y D,JIANG L H,et al. Study on the characteristics and thermal stability of nanostructures in adiabatic shear band of 2195 Al-Li alloy[J]. Applied Physics A,2015,121(3):1277-1284. doi: 10.1007/s00339-015-9506-4
|
[92] |
SAKAI T,BELYAKOV A,MIURA H. Ultrafine grain formation in ferritic stainless steel during severe plastic deformation[J]. Metallurgical and Materials Transaction A,2008,39(9):2206-2214. doi: 10.1007/s11661-008-9556-8
|
[93] |
MARTORANO M,FORTES M,PADILHA A. The growth of protrusions at the boundary of a recrystallized grain[J]. Acta Materialia,2006,54(10):2769-2776. doi: 10.1016/j.actamat.2006.02.015
|
[94] |
KASSNER M E. Large-strain deformation of aluminum single crystals at elevated temperature as a test of the geometric-dynamic-recrystallization concept[J]. Metallurgical Transactions A,1989,20(10):2182-2185. doi: 10.1007/BF02650307
|
[95] |
PETTERSEN T,HOLMEDAL B,NES E. On the origin of strain softening during deformation of aluminum in torsion to large strains[J]. Metallurgical and Materials Transaction A,2003,34(12):2727-2736. doi: 10.1007/s11661-003-0174-1
|
[96] |
GHOLINIA A,HUMPHREYS F J,PRANGNELL P B. Production of ultra-fine grain microstructures in Al-Mg alloys by coventional rolling[J]. Acta Materialia,2002,50(18):4461-4476. doi: 10.1016/S1359-6454(02)00253-7
|
[97] |
BLUM W,ZHU Q,MERKEL R,et al. Geometric dynamic recrystallization in hot torsion of Al-5Mg-0.6Mn (AA5083)[J]. Materials Science & Engineering:A,1996,205(1):23-30.
|
[98] |
KONOPLEVA E V,MCQUEEN H J,EVANGELISTA E. Serrated grain boundaries in hot-worked aluminum alloys at high strains[J]. Materials Characterization,1995,34(4):251-264. doi: 10.1016/1044-5803(95)00062-3
|
[99] |
XU C L,HUANG J W,JIANG F Q,et al. Dynamic recrystallization and precipitation behavior of a novel Sc, Zr alloyed Al-Zn-Mg-Cu alloy during hot deformation [J]. Materials Characterization,2022,183:111629. doi: 10.1016/j.matchar.2021.111629
|