Journal of Aeronautical Materials
ISSN:1005-5053
Citation: | GAO Yang, WEN Sheng-ping, WANG Xiao-hui, PAN Feng. Investigation on Indentation Creep by Depth Sensing Indentation[J]. Journal of Aeronautical Materials, 2006, 26(3): 148-151. |
[1] | MAHMUDI R,ROUMINA R,RAEISINIA B.Investigation of stress exponent in the power-lawcreep of Pb-Sb alloys[J].Materials Science and Engineering A,2004,382:15-22. |
[2] | NGAN A H W,WANG H T,TANG B,et al.Correcting power-law viscoelastic effects in elastic modulus measurement using depth-sensing indentation[J].International Journal of Solids and Structures,2005,42:1831-1846. |
[3] | MA X,YOSHIDA F.Rate-dependent indentation hardness of a power-law creep solder alloy[J].Appl Phys Lett,2003,82:188-190. |
[4] | GUIN J P,ROUXEL T,KERYVIN V,et al.Indentation creep of Ge-Se chalcogenide glasses below Tg:Elastic recovery and non-Newtonian flow[J].Journal of Non-Crystalline Solids,2002,298:260-269. |
[5] | ZHANG K,WEERTMAN J R.The influence of time,temperature,and grain size on indentation creep in high-purity nanocrystalline and ultrafine grain copper[J].Appl Phys Lett,2004,85:5197-5199. |
[6] | YANG S,ZHANG Y W,ZENG K Y.Analysis of nanoindentation creep for polymeric materials[J].J Appl Phys,2004,95:3654-3667. |
[7] | LUCAS B N,OLIVER W C.Indentation power-law creep of high-purity indium[J].Metallurgical and Materials Transactions,1999,30:601-610. |
[8] | CELLS J P,ROOS J R,VANCOILLE E,et al.Characterization of hard ceramic coatings by nanoindentation[A].Wear of Materials:International Conference on Wear of Materials[C] ,1991.655-658. |
[9] | MAYO M J,NIX W D.Micro-indentation study of superplasticity in Pb,Sn,and Sn-38wt% Pb[J].Acta Metall,1988,36:2183-2192. |
[10] | MAYO M J,SIEGEL W,NARAYANASAMY A,et al.Mechanical properties of nanophase TiO2 as determined by nanoindentation[J].J Mater Res,1990,5:1073-1082. |
[11] | HANNULA S P,STONE D S,LI C Y.Determination of time-dependent plastic properties of metals by indentation load relaxation techniques[J].Mater Res Soc Symp Proc,1985,40:217-224. |
[12] | LI X D,BHUSHAN B.A review of nanoindentation continuous stiffness measurement technique and its applications[J].Materials Charaterization,2002,48:11-36. |
[13] | LI,W B,HENSHALL J L,HOOPER R M,et al.Mechanisms of indentation creep[J].Acta Matall Mater,1991,39:3099-3110. |
[14] | CHANG H,ALTSTETTER C J,AVERBACK R S.Characteristics of nanophase TiAl produced by inert gas condensation[J].J Mater Res,1992,7:2962-2970. |
[15] | SHEN B L,ITOI T,YAMASAKI T,et al.Study on laser ig nition of Ni-33.3at% Al power compacts.Indentation creep of nanocrystalline Cu-TiC alloys prepared by mechanical alloying[J].Scripta Materialia,2000,42:893-898. |
[16] | RAMAN V,BERRICHE R.Investigation of the creep processes in tin and aluminum using a depth-sensing indentation technique[J].J Mater Res,1992,7 (3):627-638. |
[17] | COURTNEY H.Mechanical Behavior of Materials[M].Beijing:Chinese Machine Press. |
[18] | 陈吉,汪伟,卢磊,等.纳米压痕法测量Cu的室温蠕变速率敏感指数[J].金属学报,2001,37(11):1179-1183. |
[19] | 张建民,徐可为.纳米压痕法测量Cu的室温蠕变速率敏感指数[J].物理学报,2004,53(8):2439-2443. |