Volume 22 Issue 2
Aug.  2012
Turn off MathJax
Article Contents
Article Navigation >  Journal of Aeronautical Materials  > 2002  >  22(2): 49-53
CHEN Jianfeng, WU Gaohui, SUN Dongli, JIANG Longtao. Strengthening mechanisms of metal matrix composites[J]. Journal of Aeronautical Materials, 2002, 22(2): 49-53.
Citation: CHEN Jianfeng, WU Gaohui, SUN Dongli, JIANG Longtao. Strengthening mechanisms of metal matrix composites[J]. Journal of Aeronautical Materials, 2002, 22(2): 49-53.
shu

Strengthening mechanisms of metal matrix composites

  • School of Materials Science and Engineering,Harbin Institute of Technology,Harbin 150001,China

  • Received Date: 2001-09-21
  • Rev Recd Date: 2002-01-21
  • Publish Date: 2002-05-01
    Abstract
  • The strengthening mechanisms and strength prediction have always been the focus of investigation, because these are critical to the design of metal matrix composites (MMCs). Numerous strengthening mechanism and theoretical models have been developed to correlate the mechanical behaviors of MMCs with their microstructure characteristics, but no one accords with the experimental results very well. An overview of recent studies on strengthening mechanisms and models for MMCs is presented. The disadvantages, appropriate research orientation are also discussed.

     

    • FullText(HTML)
  • loading
    • References(32)
  • [1] 武高辉,赵永春,马森林.亚微米级Al2O3颗粒增强LD2铝合金复合材料的拉伸性能与强化机制[J].复合材料学报,1998,15(3):21-26.
    [2] 魏建锋,宋余九. 颗粒增强纯铝基复合材料的增强机制[J]. 稀有金属材料与工程,1994,23(3):17-22.
    [3] 张力宁,王俊. 颗粒增强金属基复合材料强化机制的探讨[J].东南大学学报,1995,25(4):77-82.
    [4] 克莱茵T W,威瑟斯P J.金属基复合材料导论[M].余永宁,房志刚译.北京:冶金工业出版社,1996.348-350
    [5] LANDIS CHAD M,McMEEKING ROBERT M.A shear-lag model for a broken fiber embedded in a composite with a ductile matrix[J].Composites Science and Technology,1999, 59:447-457.
    [6] NARDONE V C,PREWO K M.On the strength of discontinuous silicon carbide reinforced aluminum composites[J].Scripta Metall,1986,20(1):43-48.
    [7] RAMAKRISHNAN N.An analytical study on the strengthening of particulate reinforced metal matrix composites[J]. Acta mater,1996,44(1):69-77.
    [8] ROATTA A,BOLMARO R E. An Eshelby inclusion-based model for the study of stresses and plastic strain localization in metal composites I: general formulation and its application to round particles[J].Materials Science and Engineering, 1997, A229:182-191.
    [9] ROATTA A,BOLMARO R E.An Eshelby inclusion-based model for the study of stresses and plastic strain localization in metal composites II: fiber reinforcement and lamellar inclusions[J].Materials Science and Engineering,1997,A229:192-202.
    [10] LEGGOE J W,MAMMOLI A A,BUSH M B,et al.Finite element modelling of deformation in particulate reinforced metal matrix composites with random local microstructure variation[J]. Acta mater, 1998, 46(17):6075-6088.
    [11] 樊建中,姚忠凯,李义春,等. 颗粒增强铝基复合材料研究进展[J].材料导报, 1997,11(3):48-51.
    [12] WU Y.LAVERNIA J.Strengthening behavior of particulate reinforced MMCs[J]. Scripta Metall,1992,7(2):173-178.
    [13] EVANS A G,HUTCHINSON J W, McMEEKING R M.Stress-strain behavior of metal matrix composites with discontinuous reinforcements[J].Scripta Metallurgica et Materiala,1991,25:3-8.
    [14] ARSENAULT R J,SHI N.Dislocation due to differences between the coefficients of thermal expansion[J].Materials Science and Engineering,1986,81:175-187.
    [15] ARSENAULT R J,WANG L, FENG C R.Strengthenging of composites due to microstructural changes in the matrix[J]. Acta Metall Mater, 1991,39(1):47 -57.
    [16] SHIBATA SHOICHI,TAYA M,MORI T,et al. Dislocation punching from spherical inclusions in a metal matrix composite[J].Acta metall mater,1992,40(11): 3141-3148.
    [17] DUNAND D C,MORTENSEN A.Dislocation emission at fibers:I,theory of longitudinal punching by thermal stresses[J].Acta Metallurgical et Materialia,1991,39(7):1405-1416.
    [18] TAYA M, MORI T.Dislocations punched-out around a short fiber in a short fiber metal matrix composite subjected to uniform temperature change[J].Acta Metall,1987,35(1):155-162.
    [19] 董尚利,杨德庄,江中浩. 短纤维增强铝基复合材料强化机制评述[J].材料科学与工程, 2000,18(1):121-130.
    [20] IBRAHIM I A,MOHAMED F A,LAVERNIA E J.Particulate reinforced metal matrix composites:a review[J].J Mater Sci,1991,26:1137-1156.
    [21] MILLER W S,HUMPHREYS F J.Strengthening mechanism in particulate metal matrix composites[J].Scripta Metal et Mater,1991,25:33-38.
    [22] 森本启之,岩村宏,安倍睦,等.SiC粒子强化アルミニウム复合材料の离子微细化による强化[J].日本金属学会志,1994,58(8):973-979.
    [23] 吴承建,陈国良,强文江.金属材料学[M].北京:冶金工业出版社,2000.282-306.
    [24] STARINK M J,WANG P,SINCLAIE I,et al.Microstructure and strengthening of Al-Li-Cu-Mg alloys and MMCs: II modelling of yield strength[J]. Acta mater,1999, 47(14):3855-3968.
    [25] MAHON G J,HOWE J M,VASUDEVAN A K.Microstructural development and the effect of inerfacial precipitation on the tensile properties of an aluminum/ silicon-carbide composite[J].Acta metall mater,1990,38(8):1503-1512.
    [26] GOMIERO P,BRECHET Y,LOUCHET F,et al.Microstructure and mechanical properties of 2091 Al-Li alloy -Ⅱ Mechanical properties:Yield stress and work hardening[J]. Acta metall mater,1992,40(4):857.
    [27] 范赋群,王震鸣,嵇醒,等.复合材料进展[M].杨顺林编. 北京:航空工业出版社,1994.17-22.
    [28] 郑茂盛,赵更申,井新利,等.颗粒增强金属基复合材料的协同效应[J]. 材料研究学报,1995,9(suppl):583-586.
    [29] FRIEND C M.The effect of matrix properties on reinforcement in short alumina fibre-aluminum metal matrix composites[J].Journal of Materials Science,1987,22:3005-3010.
    [30] BAXTER WILLIAM J.The strength of metal matrix composites reinforced with randomly oriented discontinuous fibers[J].Metall Trans,1992,23A:3045-3053.
    [31] TERMONIA Y.Tensile strength of discontinuous fibre-reinforced composites[J]. Journal of Materials Science,1990,25:4644-465.
    [32] 赵永春,马森林,武高辉.亚微米级Al2O3p/6061复合材料的显微组织与力学性能[A].见:96中国材料研讨会论文集II:材料设计与加工[M].北京,1996.15-19
    • Relative Articles
    • Supplements(0)
    • Cited By
  • 加载中

Catalog

    通讯作者: 陈斌, bchen63@163.com
    • 1. 

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索
    Get Citation
    PDF
    XML

    Article Metrics

    Article views (5187) PDF downloads(1406) Cited by()
    Proportional views
    Related

    Copyright © 2015 Editorial Board of Journal of Aeronautical Materials

    京ICP备15058934号-1

    Address：P.Q.BOX 81-44,Beijing 100095,China

     E-mail：info@hkclxb.cn

    Supported by Beijing Renhe Information Technology Co. Ltd   百度统计

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return